6

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard

SE0205_ZCT • 8/28/2018

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Current Sensors – ZCT, Zero-Phase Current Transformers

KEMET Electronics Corporation Sales Offices

For a complete list of our global sales offices, please visit www.kemet.com/sales.

Disclaimer

All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible

for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information

given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements

of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but

are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information

is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice

inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or

liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(such as the installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal

injury or property damage.

Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other

measures may not be required.

KEMET is a registered trademark of KEMET Electronics Corporation.