LM2904Q1

DUAL OPERATIONAL AMPLIFIER

SLOS414E − MAY 2003 − REVISED JUNE 2004

1

POST OFFICE BOX 655303

Can Be Supported Along With

Major-Change Approval

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

Supply Voltage . . . 0.7 mA Typ

Includes Ground, Allowing Direct Sensing

Near Ground

Maximum-Rated Supply Voltage:

− Non-V Devices . . .

±26 V

− V-Suffix Devices...

±32 V

† Contact factory for details. Q100 qualification data available on

request.

− Input Offset Voltage ...3 mV Typ

− Input Offset Current ...2 nA Typ

− Input Bias Current . . . 20 nA Typ

Amplification . . . 100 V/mV Typ

description/ordering information

This device consists of two independent, high-gain, frequency-compensated operational amplifiers designed

to operate from a single supply over a wide range of voltages. Operation from split supplies is possible as long

1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the

magnitude of the supply voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational

amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example,

these devices can be operated directly from the standard 5-V supply used in digital systems and easily provide

the required interface electronics without additional

±5-V supplies.

The LM2904Q is manufactured to demanding automotive requirements.

ORDERING INFORMATION

TA

VIOmax

AT 25

°C

MAX VCC

PACKAGE‡

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

7 mV

26 V

SOIC (D)

Tape and reel

LM2904QDRQ1

2904Q1

7 mV

26 V

TSSOP (PW)

Tape and reel

LM2904QPWRQ1

2904Q1

−40

°C to 125°C

7 mV

32 V

SOIC (D)

Tape and reel

LM2904VQDRQ1

2904VQ1

−40

°C to 125°C

7 mV

32 V

TSSOP (PW)

Tape and reel

LM2904VQPWRQ1

2904VQ1

2 mV

32 V

SOIC (D)

Tape and reel

LM2904AVQDRQ1

2904AVQ

2 mV

32 V

TSSOP (PW)

Tape and reel

LM2904AVQPWRQ1

2904AVQ

‡ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Copyright

 2004, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

1

2

3

4

8

7

6

5

1OUT

1IN−

1IN+

GND

2OUT

2IN−

2IN+

D OR PW PACKAGE

(TOP VIEW)