4th Generation USB2.0 Flash Media Controller with Integrated Card Power FETs and HS Hub

Datasheet

Revision 1.3 (05-25-05)

6

SMSC USB2601/USB2602

DATASHEET

Chapter 1 General Description

The USB2601/USB2602 is an Integrated “combo” High-Speed USB hub and Flash Media Controller.

The Flash media controller permanently resides on Port 1 of the Integrated USB hub.

1.1

High-Speed Hub

The integrated SMSC Hub is fully compliant with the USB2.0 Specification and will attach to a USB

host as a Full-Speed Hub or as a Full-/High-Speed Hub. The Hub supports Low-Speed, Full-Speed,

and High-Speed (if operating as a High-Speed Hub) downstream devices on all of the enabled

downstream ports.

A dedicated Transaction Translator (TT) is available for each downstream facing port. This architecture

ensures maximum USB throughput for each connected device when operating with mixed-speed

peripherals.

downstream ports, and to limit current and sense over-current conditions.

All required resistors on the USB ports are integrated into the Hub. This includes all series termination

resistors on D+ and D– pins and all required pull-down and pull-up resistors on D+ and D– pins. The

over-current sense inputs for the downstream facing ports have internal pull-up resistors.

Throughout this document the upstream facing port of the hub will be referred to as the upstream port,

and the downstream facing ports will be called the downstream ports.

Three externally available ports are available for general USB device connectivity.

1.2

Flash Media Controller

The Bulk Only Mass Storage Class Peripheral Controller intended for supporting CompactFlash (CF

and CF Ultra I/II) in True IDE Mode only, SmartMedia (SM) and XD cards, Memory Stick (MS), Memory

Stick DUO (MSDUO) and Memory Stick Pro (MSPRO), Secure Digital (SD), and MultiMediaCard

(MMC) flash memory devices. It provides a single chip solution for the most popular flash memory

cards in the market.

The device consists of buffers, Fast 8051 microprocessor with expanded scratchpad, and program

SRAM, and CF, MS, SM and SD controllers. The SD controller supports both SD and MMC devices.

SM controller supports both SM and xD cards.

12K bytes of scratchpad SRAM and 768 Bytes of program SRAM are also provided.

Eleven GPIO pins are provided for indicators, external serial EEPROM for OEM ID and system

configuration information, and other special functions.

Internal power FETs are provided to directly supply power to the xD/SM, MMC/SD and MS/MSPro

cards.

The internal ROM program is capable of implementing any combination of single or multi-LUN

CF/SD/MMC/SM/MS reader functions with individual card power control and activity indication. SMSC

also provides licenses** for Win98 and Win2K drivers and setup utilities. Note: Please check with

SMSC for precise features and capabilities for the current ROM code release.

*Note: In order to develop, make, use, or sell readers and/or other products using or incorporating any of the SMSC devices made

the subject of this document or to use related SMSC software programs, technical information and licenses under patent and other

intellectual property rights from or through various persons or entities, including without limitation media standard companies,

forums, and associations, and other patent holders may be required. These media standard companies, forums, and associations

include without limitation the following: Sony Corporation (Memory Stick, Memory Stick Pro); SD3 LLC (Secure Digital); MultiMedia

Card Association (MultiMediaCard); the SSFDC Forum (SmartMedia); the Compact Flash Association (Compact Flash); and Fuji

Photo Film Co., Ltd., Olympus Optical Co., Ltd., and Toshiba Corporation (xD-Picture Card). SMSC does not make such licenses

or technical information available; does not promise or represent that any such licenses or technical information will actually be

obtainable from or through the various persons or entities (including the media standard companies, forums, and associations), or