전자부품 데이터시트 검색엔진 |
|
74F377A 데이터시트(PDF) 4 Page - NXP Semiconductors |
|
74F377A 데이터시트(HTML) 4 Page - NXP Semiconductors |
4 / 10 page Philips Semiconductors Product specification 74F377A Octal D-type flip-flop with enable 1996 Mar 12 4 ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to VCC V IOUT Current applied to output in Low output state 40 mA Tamb Operating free air temperature range 0 to +70 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT MIN NOM MAX VCC Supply voltage 4.5 5.0 5.5 V VIH High–level input voltage 2.0 V VIL Low–level input voltage 0.8 V IIk Input clamp current –18 mA IOH High–level output current –1 mA IOL Low–level output current 20 mA Tamb Operating free air temperature range 0 +70 °C DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST LIMITS UNIT CONDITIONS1 MIN TYP2 MAX E & CP inputs VCC = MIN, VIL = 0.0V3, ±10%VCC 2.5 V VOH High-level output voltage VIH = 4.5V3, IOH = MAX ±5%VCC 2.7 3.4 V Other inputs VCC = MIN, VIL = MAX, ±10%VCC 2.5 V VIH = MIN, IOH = MAX ±5%VCC 2.7 V VOL Low-level output voltage VCC = MIN, VIL = MAX, ±10%VCC 0.35 0.50 V VIH = MIN, IOL = MAX ±5%VCC 0.35 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 -1.2 V II Input current at maximum input voltage VCC = 0.0V, VI = 7.0V 100 µA IIH High–level input current VCC = MAX, VI = 2.7V 20 µA IIL Low–level input current VCC = MAX, VI = 0.5V –20 µA IOS Short circuit output current4 VCC = MAX –60 –150 mA I Supply current (total) I V = MAX 27 40 mA ICC Supply current (total) ICCH VCC = MAX 27 40 mA ICCL VCC = MAX 29 43 mA Notes to DC electrical characteristics 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. To reduce the effect of external noise during test. Special test conditions are not necessary for the ’377A. 4. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. |
유사한 부품 번호 - 74F377A |
|
유사한 설명 - 74F377A |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |