558

Communication ICs

RPM6900 Series

(3) Please set up transmitter’s carrier frequency as

same as the receiver’s f0 frequency. Otherwise error

might be occurred.

(4) If transmission signal has non-continues carrier, er-

ror might be occurred. Continuous carrier is necessary.

(5) The receiver was designed to use as in-door use

only. Therefore, please understand that the receiver can-

not cover all characteristics, in case of using it out-door.

(6) Emitting unit (remove control transmitter) has to be

considered about its emitting device function, character-

istics and characteristics of the receiver.

(7) Do not supply unnecessary stress to lead and holder.

(8) Please pay careful attention to the lens.

It might has a chance to miss-function when the lens get

dust or dirty. And also please do not touch the lens.

(9) In order to prevent IC from ESD, human body, solder

iron, etc are required to be grounded.

FElectrical, optical characteristics curves