전자부품 데이터시트 검색엔진 |
|
THS7313 데이터시트(PDF) 5 Page - Texas Instruments |
|
|
THS7313 데이터시트(HTML) 5 Page - Texas Instruments |
5 / 48 page www.ti.com ELECTRICAL CHARACTERISTICS, V S+ = 5 V THS7313 SLOS483 – NOVEMBER 2005 R L = 150 Ω to GND, Input Bias = dc, SAG pin shorted to the output pin (unless otherwise noted) TYP OVERTEMPERATURE PARAMETER TEST CONDITIONS –40 °C to 25 °C 25 °C 0 °C to 70°C UNITS MIN/MAX 85 °C AC PERFORMANCE Small-signal bandwidth VO– 0.2 VPP(1) 8 6.7/9.3 6.55/9.45 6.5/9.5 MHz Min/Max (–3 dB) Large-signal bandwidth VO– 2 VPP(1) 8 MHz (–3 dB) Group delay f = 100 kHz 67 ns Group delay variation with f = 5.1 MHz 13.5 ns respect to 100 kHz Channel-to-Channel group f = 5.1 MHz 0.5 ns delay variation f = 5.75 MHz 0.5 -0.2 / 2 -0.4 / 2.2 -0.5 / 2.3 dB Min/Max Attenuation with respect to 100 kHz f = 27 MHz 48 36 35 34 dB Min Mute feed-thru f = 1 MHz -80 dB Differential gain NTSC/PAL 0.08%/0.16 % Differential phase NTSC/PAL 0.18 °/0.18° Total harmonic distortion f = 1 MHz, VO = 2 VPP –67 dB Signal to noise ratio Unified weighting 100 kHz to 6 MHz 82 dB Channel-to-Channel f = 1 MHz –64 dB Crosstalk MUX Isolation f = 5.1 MHz 73 dB AC gain – All channels f = 100 kHz 6 5.7/6.3 5.65/6.35 5.65/6.35 dB Min/Max Output impedance f = 10MHz 0.7 Ω DC PERFORMANCE Output offset voltage Bias = dc 30 90 95 95 mV Max Average offset voltage drift Bias = dc 20 µV/°C Bias = dc + 135 mV, VI = 0 V 290 235/345 215/360 200/375 mV Min/Max Bias output voltage Bias = ac 2.5 2.3/2.7 2.25/2.75 2.25/2.75 V Min/Max Sync tip clamp output Bias = ac STC 300 230/375 215/385 210/390 mV Min/Max voltage Input bias current Bias = dc - implies Ib out of the pin –0.6 –4 –5 –5 µA Max Average bias current drift Bias = dc 10 nA/ °C Bias = ac STC, low bias 1.9 0.6/3.3 0.5/3.5 0.4/3.6 µA Min/Max Sync tip clamp bias current Bias = ac STC, mid bias 6 4.3/8.2 4.1/8.4 4/8.5 µA Min/Max Bias = ac STC, high bias 8.2 6.2/10.8 6/11 5.9/11.1 µA Min/Max INPUT CHARACTERISTICS Input voltage range Bias = dc - limited by output 0/2.4 0/2.35 0/2.3 0/2.3 V Min/Max Bias = ac bias mode 19 k Ω Input resistance Bias = dc, dc + 135 mV, ac STC 3 M Ω Input capacitance 2 pF OUTPUT CHARACTERISTICS RL = 150 Ω to midrail 4.8 4.4 4.3 4.3 V Min RL = 150 Ω to GND 4.65 4.2 4.1 4.1 V Min High output voltage swing RL = 75 Ω to midrail 4.7 4.3 4.2 4.2 V Min RL = 75 Ω to GND 4.4 4.1 4 4 V Min RL = 150 Ω to midrail 0.2 0.34 0.37 0.37 V Max RL = 150 Ω to GND 0.1 0.23 0.26 0.27 V Max Low output voltage swing RL = 75 Ω to Midrail 0.35 0.46 0.5 0.5 V Max RL = 75 Ω to GND 0.1 0.23 0.26 0.27 V Max (1) The Min/Max values listed are specified by design only. 5 |
유사한 부품 번호 - THS7313 |
|
유사한 설명 - THS7313 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |