전자부품 데이터시트 검색엔진 |
|
74LVX4066 데이터시트(PDF) 3 Page - ON Semiconductor |
|
74LVX4066 데이터시트(HTML) 3 Page - ON Semiconductor |
3 / 12 page MC74LVX4066 http://onsemi.com 3 MAXIMUM RATINGS Symbol Parameter Value Unit VCC Positive DC Supply Voltage (Referenced to GND) – 0.5 to + 7.0 V VIS Analog Input Voltage (Referenced to GND) – 0.5 to VCC + 0.5 V Vin Digital Input Voltage (Referenced to GND) – 0.5 to VCC + 0.5 V Iin DC Current Into or Out of ON/OFF Control Pins ± 20 mA Is DC Current Into or Out of Switch Pins ± 20 mA PD Power Dissipation in Still Air, SOIC Package† TSSOP Package† 500 450 mW Tstg Storage Temperature – 65 to + 150 _C TL Lead Temperature, 1 mm from Case for 10 Seconds 260 _C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. †Derating — SOIC Package: – 7 mW/ _C from 65_ to 125_C TSSOP Package: − 6.1 mW/ _C from 65_ to 125_C RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit VCC Positive DC Supply Voltage (Referenced to GND) 2.0 6.0 V VIS Analog Input Voltage (Referenced to GND) GND VCC V Vin Digital Input Voltage (Referenced to GND) GND VCC V VIO* Static or Dynamic Voltage Across Switch − 1.2 V TA Operating Temperature, All Package Types – 55 + 85 _C tr, tf Input Rise and Fall Time, ON/OFF Control Inputs (Figure 10) VCC = 3.3 V ± 0.3 V VCC = 5.0 V ± 0.5 V 0 0 100 20 ns/V *For voltage drops across the switch greater than 1.2 V (switch on), excessive VCC current may be drawn; i.e., the current out of the switch may contain both VCC and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded. DC ELECTRICAL CHARACTERISTIC Digital Section (Voltages Referenced to GND) VCC Guaranteed Limit Symbol Parameter Test Conditions VCC V – 55 to 25 _C v 85_C v 125_C Unit VIH Minimum High−Level Voltage ON/OFF Control Inputs (Note 1) Ron = Per Spec 2.0 3.0 4.5 5.5 1.5 2.1 3.15 3.85 1.5 2.1 3.15 3.85 1.5 2.1 3.15 3.85 V VIL Maximum Low−Level Voltage ON/OFF Control Inputs (Note 1) Ron = Per Spec 2.0 3.0 4.5 5.5 0.5 0.9 1.35 1.65 0.5 0.9 1.35 1.65 0.5 0.9 1.35 1.65 V Iin Maximum Input Leakage Current ON/OFF Control Inputs Vin = VCC or GND 5.5V ± 0.1 ± 1.0 ± 1.0 mA ICC Maximum Quiescent Supply Current (per Package) Vin = VCC or GND VIO = 0 V 5.5 4.0 40 160 mA 1. Specifications are for design target only. Not final specification limits. This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high−impedance cir- cuit. For proper operation, Vin and Vout should be constrained to the range GND v (Vin or Vout) v VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. I/O pins must be connected to a properly terminated line or bus. |
유사한 부품 번호 - 74LVX4066 |
|
유사한 설명 - 74LVX4066 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |