전자부품 데이터시트 검색엔진 |
|
MPX5999D 데이터시트(PDF) 2 Page - Freescale Semiconductor, Inc |
|
MPX5999D 데이터시트(HTML) 2 Page - Freescale Semiconductor, Inc |
2 / 8 page Sensors 2 Freescale Semiconductor MPX5999D Table 1. Maximum Ratings(1) 1. Extended exposure at the specified limits may cause permanent damage or degradation to the device. Rating Symbol Value Unit Maximum Pressure(2) (P2 ≤ 1 Atmosphere) 2. This sensor is designed for applications where P1 is always greater than, or equal to P2. P2 maximum is 500 kPa. P1max 4000 kPa Storage Temperature Tstg –40 to +125 °C Operating Temperature TA –40 to +125 °C Table 2. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2. Decoupling circuit shown in Figure 4 required to meet electrical specifications.) Characteristic Symbol Min Typ Max Unit Pressure Range(1) POP 0 — 1000 kPa Supply Voltage(2) VS 4.75 5.0 5.25 Vdc Supply Current IO —7.0 10 mAdc Zero Pressure Offset(3) (0 to 85 °C) Voff 0.088 0.2 0.313 Vdc Full Scale Output(4) (0 to 85 °C) VFSO 4.587 4.7 4.813 Vdc Full Scale Span(5) (0 to 85 °C) VFSS —4.5 — Vdc Sensitivity V/P — 4.5 — mV/kPa Accuracy(6) (0 to 85 °C) — — — ±2.5 %VFSS Response Time(7) tR —1.0 — ms Output Source Current at Full Scale Output IO+ —0.1 — mAdc Warm-Up Time(8) —— 20 — ms 1. 1.0 kPa (kiloPascal) equals 0.145 psi. 2. Device is ratiometric within this specified excitation range. 3. Offset (Voff) is defined as the output voltage at the minimum rated pressure. 4. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure. 5. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure. 6. Accuracy (error budget) consists of the following: • Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range. • Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied. • Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or maximum rated pressure, at 25°C. • TcSpan: Output deviation over the temperature range of 0° to 85°C, relative to 25°C. • TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0° to 85°C, relative to 25°C. • Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C. 7. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure. 8. Warm-up Time is defined as the time required for the device to meet the specified output voltage after the pressure has been stabilized. Table 3. Mechanical Characteristics Characteristics Typ Unit Weight, Basic Element (Case 867) 4.0 grams |
유사한 부품 번호 - MPX5999D |
|
유사한 설명 - MPX5999D |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |