전자부품 데이터시트 검색엔진 |
|
SP1486E 데이터시트(PDF) 1 Page - Sipex Corporation |
|
SP1486E 데이터시트(HTML) 1 Page - Sipex Corporation |
1 / 15 page Rev J 3/8/2007 SP486E PROFIBUS/RS485 Transceivers © Copyright 2007 Sipex Corporation DESCRIPTION FEATURES APPLICATIONS SP1486E +5V, 20Mbps PROFIBUS RS485/RS422 Transceivers Advanced Failsafe, 1/8th Unit Load, ±15kV ESD-Protected • Recommended for PROFIBUS applications • High differential output drive, minimum 2.1V into 54Ω load • 5.0V Single Supply Operation • ns driver and reveiver skew • 20 Mbps data rate • /8th Unit Load, 256 transceivers on bus • Robust ESD Protection for RS485 pins • ±15kV Air-Gap Discharge • ±15kV Human Body Model • ±8kV Contact Discharge • Hot Swap glitch protection on control inputs • Receiver failsafe on open, short or terminated lines • Driver short circuit current limit and thermal shutdown for overload protection • Very low 300μA static power consumption • 1μA shutdown mode • High Speed RS485 Communications • Industrial Process Control • PROFIBUS applications SP486E is a half duplex differential line transceiver suitable for high speed bidirectional commu- nication on multipoint bus transmission lines. Each device contains one differential driver and one differential receiver. Devices comply with TIA/EIA-485 and TIA/EIA-422 standards and also meet the higher drive and tighter skew requirements of PROFIBUS applications. Lead-free and RoHS compli- ant packages are available for all models. PROFIBUS is in wide use in industrial control and automation applications and the SP486E is ruggedized for use in harsh operating conditions. Receivers are specially designed to fail-safe to a logic high output state if the inputs are left un-driven or shorted. All RS485 bus-pins are protected against severe ESD events up to ±15kV (Air-Gap and Human Body Model) and up to ±8kV Contact Discharge (IEC 1000-4-2). Drivers are protected from excess current flow caused by bus contention or output short-circuits by both an internal current limit and a thermal-overload shutdown. Devices are rated for Industrial (-40 to +85ºC) or Extended (-40 to +125ºC) operating temperatures. Receiv- ers have exceptionally high input impedance, which places only /8th the standard load on a shared bus. Up to 256 transceivers may coexist while preserving full signal margin. All devices operate from a single 5.0 V power supply and draw negligible quiescent power. Both driver and receiver can be enabled and disabled independently and the device enters a low power shutdown mode if both driver and receiver are disabled. The bus-pin outputs of disabled modules are in high impedance state. The high impedance driver output is maintained over the entire common- mode voltage range from -7 to +2V. Solved by TM B R B D 1 4 3 2 8 5 6 7 A GND V CC RO RE DE DI +5V 100nF RT SP1486E |
유사한 부품 번호 - SP1486E |
|
유사한 설명 - SP1486E |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |