8. Precaution for use

(1) Storage

In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator)

with a desiccant . Otherwise, to store them in the following environment is recommended.

Temperature : 5 ~30

Humidity : 60%HR max.

(2) Attention after opened

However Photo Transistor is correspond SMD, when Photo Transistor be soldered dip, interfacial

separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in

followed.

a. After opened and mounted, the soldering shall be quickly.

b. Keeping of a fraction

Temperature : 5 ~ 40℃

Humidity : less than 30%

(3) In case of more than 1 week passed after opening or change color of indicator on desiccant

components shall be dried 10-12hr. at 60±5℃.

(4) In case of supposed the components is humid, shall be dried dip-solder just before.

100Hr at 80±5℃ or 12Hr at 100±5℃.

(5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to

normal temp. after soldering.

(6) Quick cooling shall not be avoid.

(7) Components shall not be mounted on warped direction of PCB.

(8) Anti radioactive ray design is not considered for the products listed here in.

(9) Gallium arsenide is used in some of the products listed in this publication. These products are

dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid

or inhale the gas generated by such products when chemically disposed.

(10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When

washing is required, IPA should be used.

(11) Photo Transistors must be stored to maintain a clean atmosphere. If the Photo Transistors are

stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere

should be used for storage.

(12) The Photo Transistors must be soldered within seven days after opening the moisture-proof packing.

(13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry

place.

(14) The appearance and specifications of the product may be modified for improvement without notice.

SEOUL SEMICONDUCTOR CO,. LTD.

148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea

TEL: 82-2-3281-6269 FAX: 82-2-858-5537

- 6/6 -

SSC-PTR202

SSC-QP-0401-06(REV.0)