전자부품 데이터시트 검색엔진 |
|
STDS75M2E 데이터시트(PDF) 9 Page - STMicroelectronics |
|
STDS75M2E 데이터시트(HTML) 9 Page - STMicroelectronics |
9 / 37 page STDS75 Summary description 9/37 1.3 Pin descriptions See Figure 1 on page 7 and Table 1 on page 7 for a brief overview of the signals connected to this device. 1.3.1 SDA (open drain) This is the Serial Data Input/Output pin for the 2-wire serial communication port. 1.3.2 SCL This is the Serial Clock Input pin for the 2-wire serial communication port. 1.3.3 OS/INT (open drain) This is the Over-Limit Signal/Interrupt Alert Output pin. It is open drain, so it needs a pull-up resistor. Note: The open drain thermostat output that indicates if the temperature has exceeded user- programmable limits (Over/Under Temperature indicator). 1.3.4 GND Ground; it is the reference for the power supply. It must be connected to system ground. 1.3.5 A2, A1, A0 A2, A1, and A0 are selectable address pins for the 3LSBs of the I2C interface address. They can be set to VDD or GND to provide 8 unique address selections. 1.3.6 VDD This is the supply voltage pin, and ranges from +2.7V to +5.5V. |
유사한 부품 번호 - STDS75M2E |
|
유사한 설명 - STDS75M2E |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |