전자부품 데이터시트 검색엔진 |
|
AD811JRZ 데이터시트(PDF) 6 Page - Analog Devices |
|
AD811JRZ 데이터시트(HTML) 6 Page - Analog Devices |
6 / 20 page AD811 Rev. E | Page 6 of 20 ABSOLUTE MAXIMUM RATINGS Table 2. Parameter Rating Supply Voltage ±18 V AD811JR Grade Only ±12 V Internal Power Dissipation Observe Derating Curves 8-Lead PDIP Package θJA = 90°C/ W 8-Lead CERDIP Package θJA = 110°C/W 8-Lead SOIC Package θJA = 155°C/W 16-Lead SOIC Package θJA = 85°C/W 20-Lead SOIC Package θJA = 80°C/W 20-Lead LCC Package θJA = 70°C/W Output Short-Circuit Duration Observe Derating Curves Common-Mode Input Voltage ±VS Differential Input Voltage ±6 V Storage Temperature Range (Q, E) −65°C to +150°C Storage Temperature Range (N, R) −65°C to +125°C Operating Temperature Range AD811J 0°C to +70°C AD811A −40°C to +85°C AD811S −55°C to +125°C Lead Temperature Range (Soldering 60 sec) 300°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. MAXIMUM POWER DISSIPATION The maximum power that can be safely dissipated by the AD811 is limited by the associated rise in junction temper- ature. For the plastic packages, the maximum safe junction temperature is 145°C. For the CERDIP and LCC packages, the maximum junction temperature is 175°C. If these maximums are exceeded momentarily, proper circuit operation is restored as soon as the die temperature is reduced. Leaving the device in the “overheated” condition for an extended period can result in device burnout. To ensure proper operation, it is important to observe the derating curves in Figure 22 and Figure 25. While the AD811 is internally short-circuit protected, this may not be sufficient to guarantee that the maximum junction temperature is not exceeded under all conditions. An important example is when the amplifier is driving a reverse-terminated 75 Ω cable and the cable’s far end is shorted to a power supply. With power supplies of ±12 V (or less) at an ambient tempera- ture of +25°C or less, and the cable shorted to a supply rail, the amplifier is not destroyed, even if this condition persists for an extended period. METALIZATION PHOTOGRAPH Contact the factory for the latest dimensions. 0.0618 (1.57) 0.098 (2.49) +INPUT –INPUT V– V+ VOUT AD811 6 7 4 3 2 Figure 7. Metalization Photograph Dimensions Shown in Inches and (Millimeters) ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprie- tary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. |
유사한 부품 번호 - AD811JRZ |
|
유사한 설명 - AD811JRZ |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |