전자부품 데이터시트 검색엔진 |
|
TIP-3526PCS-8 데이터시트(PDF) 4 Page - Vishay Siliconix |
|
TIP-3526PCS-8 데이터시트(HTML) 4 Page - Vishay Siliconix |
4 / 9 page www.vishay.com 5 TIP-3526PCS-8 Vishay Dale Document Number: 37026 Revision 05-Dec-00 CODE (ASCII) @ DC1 DC3 A B C N H G E P L M O CODE (HEX) 40 11 13 41 xx yy 42 xx yy 43 xx yy 4E xx yy 48 47 aa-nn FF 45 50 aaaa FF 4C aaa FF 4D xx yy 4F RESPONSE (Code received from touch panel) Enable ENTER point mode (22) *Disable ENTER point mode (23) This coordinate reporting mode will report the coordinates of the point where a stylus is entered into the touch panel. This mode can be used individually or in combination with EXIT point, CONTINUOUS or TRACKING modes. The following report format is used. If more than one stylus enters the touch panel, a non-contiguous report will be generated. 42 = start of enter report xx yy = binary X and Y, > = 0, X, Y = FE if non-contiguous Enable EXIT point mode (20) *Disable EXIT point mode (21) This coordinate reporting mode will report the coordinate of the point where a stylus is removed from the touch panel. This mode can be used individually or in combination with ENTER point, CONTINUOUS or TRACKING modes. The following report format is used. If more than one stylus enters the touch panel, a non-contiguous report will be generated. 43 = start of exit report xx yy = binary X and Y, > = 0, X, Y = FE in non-contiguous Enable TRACKING/disable CONTINUOUS mode (34) This coordinate reporting mode will report the coordinates of a stylus that remains in the touch panel, but only as the stylus changes locations. This mode can be used individually or in combination with ENTER point or EXIT modes. The following report format is used. If more than one stylus enters the touch panel, a non-contiguous report will be generated. 4E = start of coordinates report xx yy = binary X and Y, > = 0, X, Y = FE if non-contiguous RESPONSE Successful baud rate selection (autobaud only) DC1, Ctl Q, XON Software Handshaking DC3, Ctl S, XOFF Software Handshaking CONTINUOUS touch coordinates, X, Y - binary X and Y, > = 0 - X, Y = FE if non-contiguous ENTER touch coordinate, X, Y - binary X and Y, > = 0 - X, Y = FE if non-contiguous EXIT touch coordinates, X, Y - binary X and Y, > = 0 - X, Y = FE if non-contiguous TRACKING touch coordinates, X, Y - binary X and Y, > = 0 - X, Y = FE if non-contiguous No coordinate report available Failed beams, bad photo pairs, end RS-232 error (overrun or framing) Model Number, string, end - aaaa = variable length ASCII string Software revision number, string, end - aaa = variable length ASCII string Matrix size, max X + 1, max Y + 1 Buffer overflow error |
유사한 부품 번호 - TIP-3526PCS-8 |
|
유사한 설명 - TIP-3526PCS-8 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |