TPA102

150-mW STEREO AUDIO POWER AMPLIFIER

SLOS213C – AUGUST 1998 – REVISED MARCH 2000

2

POST OFFICE BOX 655303

AVAILABLE OPTIONS

TA

PACKAGED DEVICE

MSOP

TA

MSOP†

Symbolization

–40

°C to 85°C

TPA102DGN

TI AAC

† The DGN package is available in left-ended tape and reel only (e.g.,

TPA102DGNR).

Terminal Functions

TERMINAL

I/O

DESCRIPTION

NAME

NO.

I/O

DESCRIPTION

BYPASS

1

I

Tap to voltage divider for internal mid-supply bias supply. Connect to a 0.1

µF to 1 µF low ESR capacitor for

best performance.

GND

2

I

GND is the ground connection.

IN1–

8

I

IN1– is the inverting input for channel 1.

IN2–

4

I

IN2– is the inverting input for channel 2.

SHUTDOWN

3

I

Puts the device in a low quiescent current mode when held high.

VDD

6

I

VDD is the supply voltage terminal.

VO1

7

O

VO1 is the audio output for channel 1.

VO2

5

O

VO2 is the audio output for channel 2.

6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total power dissipation

internally limited

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–40

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

POWER RATING

DERATING FACTOR

ABOVE TA = 25°C

TA = 70°C

POWER RATING

TA = 85°C

POWER RATING

DGN

2.14 W‡

17.1 mW/

°C

1.37 W

1.11 W

‡ Please see the Texas Instruments document, PowerPAD Thermally Enhanced Package Application Report

(literature number SLMA002), for more information on the PowerPAD package. The thermal data was

measured on a PCB layout based on the information in the section entitled

Texas Instruments Recommended

Board for PowerPAD on page 33 of the before mentioned document.

recommended operating conditions

MIN

MAX

UNIT

Supply voltage, VDD

2.5

5.5

V

Operating free-air temperature, TA

–40

85

°C