전자부품 데이터시트 검색엔진 |
|
TPIC6C596DRQ1 데이터시트(PDF) 4 Page - Texas Instruments |
|
|
TPIC6C596DRQ1 데이터시트(HTML) 4 Page - Texas Instruments |
4 / 17 page TPIC6C596 POWER LOGIC 8BIT SHIFT REGISTER SLIS093C − MARCH 2000 − REVISED APRIL 2005 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions MIN MAX UNIT Logic supply voltage, VCC 4.5 5.5 V High-level input voltage, VIH 0.85 VCC V Low-level input voltage, VIL 0.15 VCC V Pulsed drain output current, TC = 25°C, VCC = 5 V, all outputs on (see Notes 3 and 5 and Figure 11) 250 mA Setup time, SER IN high before SRCK ↑, tsu (see Figure 2) 15 ns Hold time, SER IN high after SRCK ↑, th (see Figure 2) 15 ns Pulse duration, tw (see Figure 2) 40 ns Operating case temperature, TC −40 125 °C NOTES: 3. Pulse duration ≤ 100 µs and duty cycle ≤ 2%. 5. Technique should limit TJ − TC to 10°C maximum. electrical characteristics, VCC = 5 V, TC = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT V(BR)DSX Drain-to-source breakdown voltage ID = 1 mA 33 37 V VSD Source-to-drain diode forward voltage IF = 100 mA 0.85 1.2 V VOH High-level output voltage, SER OUT IOH = − 20 µA, VCC = 4.5 V 4.4 4.49 V VOH High-level output voltage, SER OUT IOH = − 4 mA, VCC = 4.5 V 4 4.2 V VOL Low-level output voltage, SER OUT IOL = 20 µA, VCC = 4.5 V 0.005 0.1 V VOL Low-level output voltage, SER OUT IOL = 4 mA, VCC = 4.5 V 0.3 0.5 V IIH High-level input current VCC = 5.5 V, VI = VCC 1 µA IIL Low-level input current VCC = 5.5 V, VI = 0 −1 µA ICC Logic supply current VCC = 5.5 V All outputs off 20 200 A ICC Logic supply current VCC = 5.5 V All outputs on 150 500 µA ICC(FRQ) Logic supply current at frequency fSRCK = 5 MHz, All outputs off, CL = 30 pF, See Figures 2 and 6 1.2 5 mA IN Nominal current VDS(on) = 0.5 V, TC = 85°C, IN = ID, See Notes 5, 6 and 7 90 mA VDS = 30 V, VCC = 5.5 V 0.1 0.2 IDSX Off-state drain current VDS = 30 V, TC = 125°C VCC = 5.5 V, 0.15 0.3 µA ID = 50 mA, VCC = 4.5 V 6.5 9 rDS(on) Static drain-source on-state resistance ID = 50 mA, TC = 125°C, VCC = 4.5 V See Notes 5 and 6 and Figures 7 and 8 9.9 12 Ω ID = 100 mA, VCC = 4.5 V 6.8 10 NOTES: 5. Technique should limit TJ − TC to 10°C maximum. 6. These parameters are measured with voltage-sensing contacts separate from the current-carrying contacts. 7. Nominal current is defined for a consistent comparison between devices from different sources. It is the current that produces a voltage drop of 0.5 V at TC = 85°C. |
유사한 부품 번호 - TPIC6C596DRQ1 |
|
유사한 설명 - TPIC6C596DRQ1 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |