전자부품 데이터시트 검색엔진 |
|
TS3DS10224RUKR 데이터시트(PDF) 5 Page - Texas Instruments |
|
|
TS3DS10224RUKR 데이터시트(HTML) 5 Page - Texas Instruments |
5 / 17 page TS3DS10224 www.ti.com SCDS318 – JUNE 2011 ELECTRICAL CHARACTERISTICS (1) For Single 1:4 or Dual 1:2 configurations. TA = –40°C to 85°C, Typical values are at VCC = 3.3V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP(2) MAX UNIT VIK Digital input clamp voltage VCC = 3.6 V, II = –18 mA –1.2 -0.9 V IIN Digital input leakage current VCC = 3.6 V, VIN = 0 to 3.6 V ±2 μA IOZ (3) VCC = 3.6 V, VO = 0 V to 3.6 V, VI = 0 V, Switch OFF ±2 μA IOFF Power off leakage current VCC = 0 V, VIN = VCC or GND,VI/O = 0 V to 3.6 V ±5 μA ICC Supply current VCC = 3.6 V, II/O = 0, Switch ON or OFF 50 100 μA CIN Digital input capacitance VCC = 3.3 V, VIN = VCC or GND 3 5 pF CI/O(OFF) OFF capacitance VCC = 3.3 V, VI/O = 3.3 V or 0, f = 10 MHz, Switch OFF 6 7 pF CI/O(ON) ON capacitance VCC = 3.3 V, VI/O = 3.3 V or 0, f = 10 MHz, Switch ON 9 10 pF VCC = 3.6 V, VI = VCC, IO = –30 mA 13 19 Ω ron ON state resistance VCC = 3.3 V, VI = 0.5V, IO = –30 mA 10 Ω ON state resistance match Δron VCC = 3 V, VI = 0 to VCC, IO = –30 mA 2 2.5 Ω between channels ron(flat) ON state resistance flatness VCC = 3 V, VI = 1.5 V and VCC, IO = –30 mA 4 6 Ω (1) VIN and IIN refer to control inputs. VI, VO, II, and IO refer to data pins. (2) All typical values are at VCC = 3.3 V (unless otherwise noted), TA = 25°C. (3) For I/O ports, the parameter IOZ includes the input leakage current. DYNAMIC CHARACTERISTICS For Single 1:4 or Dual 1:2 configurations. TA = –40°C to 85°C, Typical values are at VCC = 3.3 V ± 10% and TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS TYP UNIT BW Bandwidth RL = 50 Ω, Switch ON 1.2 GHz OISO OFF Isolation RL = 50 Ω , f = 250 MHz –30 dB XTALK Crosstalk RL = 50 Ω , f = 250 MHz –30 dB SWITCHING CHARACTERISTICS For Single 1:4 or Dual 1:2 configurations. Over operating range, TA = –40°C to 85°C, VCC = 3.3 V ±10%, GND = 0 V (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT tpd (1) RL = 50 Ω, CL = 2 pF 50 ps tON SAI/SAO/SBI/SBO to OUTAx/OUTBx RL = 50 Ω, CL = 2 pF 40 100 ns tOFF SAI/SAO/SBI/SBO to OUTAx/OUTBx RL = 50 Ω, CL = 2 pF 20 30 ns tsk(o) (2) RL = 50 Ω, CL = 2 pF 40 ps tsk(p) (3) RL = 50 Ω, CL = 2 pF 40 ps (1) The propagation delay is the calculated RC time constant of the typical ON-State resistance of the switch and the specified load capacitance when driven by an ideal voltage source (zero output impedance). (2) Output skew between center channel and any other channel. (3) Skew between opposite transitions of the same output ( |tPHL – tPLH| ). Copyright © 2011, Texas Instruments Incorporated 5 |
유사한 부품 번호 - TS3DS10224RUKR |
|
유사한 설명 - TS3DS10224RUKR |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |