전자부품 데이터시트 검색엔진 |
|
D-300-12 데이터시트(PDF) 1 Page - PANDUIT CORP. |
|
D-300-12 데이터시트(HTML) 1 Page - PANDUIT CORP. |
1 / 7 page CUSTOMER DRAWING Tyco Electronics 305 Constitution Dr Menlo Park, CA 94025, U.S.A. TITLE: CAP, SPLICE ENCAPSULATION Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] Raychem Devices DOCUMENT NO.: D-300-08/-12/-18 TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ANGLES: N/A ROUGHNESS IN MICRON Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REV: B DATE: 31-July-08 DRAWN BY: M. FORONDA CAGE CODE: 06090 REPLACES: D010044 ECO NUMBER: 08-018889 SCALE: NTS SIZE: A SHEET: 1 of 7 © 2008 Tyco Electronics Corporation. All rights reserved If this document is printed it becomes uncontrolled. Check for the latest revision. Product Dimensions As Received After Free Recovery Maximum Weight Product Name A±2.54 (A±0.100) øB min W min øB max W min Pounds/mpc D-300-08 25.40 (1.000) 4.32 (0.170) 0.30 (0.012) 2.03 (0.080) 0.76 (0.030) 1.15 D-300-12 27.90 (1.100) 6.35 (0.250) 0.38 (0.015) 3.05 (0.120) 1.02 (0.040) 2.55 D-300-18 33.02 (1.300) 9.14 (0.360) 0.38 (0.015) 4.57 (0.180) 1.27 (0.050) 4.50 MATERIALS 1. MOLDED CAP: Heat-shrinkable, cross-linked modified polyolefin. 2. MELTABLE RING: Modified thermoplastic. 3. DEFORMABLE DAM: Radiation cross-linked, thermally stabilized modified polyolefin. APPLICATION 1. These parts are designed to meet the requirements as shown in the Requirements Section when tested as listed. 2. Parts to be assembled as outlined herein. 3. “B” recovered is the maximum inside diameter of the heat-shrinkable cap. 4. “W” is the wall thickness of the molded cap only, and is measured along the vertical wall. 5. “A” is the average length of the cap and is equal to (A min + A max)/2. 1.0 SCOPE This document covers the requirements and test procedures applicable to heat shrinkable, stub-splice encapsulation cap (caps) and the molded component thereof. 2.0 APPLICABLE DOCUMENTS The specifications and standards referenced herein shall form part of this specification to the extent specified. 3mm ±1mm |
유사한 부품 번호 - D-300-12 |
|
유사한 설명 - D-300-12 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |