전자부품 데이터시트 검색엔진 |
|
5-1195131-6 데이터시트(PDF) 1 Page - PANDUIT CORP. |
|
5-1195131-6 데이터시트(HTML) 1 Page - PANDUIT CORP. |
1 / 4 page SPECIFICATION CONTROL DRAWING TE Connectivity 305 Constitution Drive Menlo Park, CA 94025, USA Raychem Products TITLE : IN-LINE SPLICE SEALING SYSTEM, MULTI-WIRE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: D-436-42/-43 TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ANGLES: N/A ROUGHNESS IN MICRON TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DATE: 15-Apr-11 DOC ISSUE: 2 DRAWN BY: M. FORONDA REPLACES: N/A DCR NUMBER: D001303 PROD. REV. SEE TABLE SCALE: None SIZE: A SHEET: 1 of 4 If this document is printed it becomes uncontrolled. Check for the latest revision. MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene flouride. 2. INTEGRAL MULTI-WIRE SEAL: Modified thermoplastic. 3. SEPARATE MULTI-WIRE SEAL: Modified thermoplastic. 4. CRIMP SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B-75. Plating: Tin per MIL-T-10727, Type 1. Color Code: See table below. Dimensions: Crimp Splice Installation Data: Wire Size Range of Crimp Splicer Part Prod. I.D.±0.05 O.D.±0.08 Color Two Wires Three Wires Name Rev. (I.D.±0.002) (O.D.±0.003) Code Minimum Maximum Minimum Maximum D-436-42 F 1.70 (0.067) 2.62 (0.103) Blue 2 x 24 2 x 20 3 x 24 3 x 22 D-436-43 A 2.54 (0.100) 3.81 (0.150) Yellow 2 x 22 2 x 16 3 x 22 3 x 18 APPLICATION 1. These parts are designed to provide an immersion resistant in-line splices of 2 or 3 to 2 or 3 wires falling within the size range listed above, having insulations rated for at least 135C. 2. Parts are available only as an assembly of one of each Item #1 and Item #2. 3. Crimp splicer may be installed with Raychem AD-1377 crimp tool or equivalent. 4. Inside diameter and outside diameter of splice are to be measured in crimp area, 2.54 to 5.08 (0.100 to 0.200) from ends of part. Slight burr permitted on parted surfaces. 5. Acceptance sampling shall be in accordance with paragraph 4.6.1 of MIL-T-7928. 6 . Packing and packaging shall be in accordance with Section 5, Level C, of MIL-T-7928. 7. This document takes precedence over documents referenced herein. 1.0 TEST ASSEMBLIES |
유사한 부품 번호 - 5-1195131-6 |
|
유사한 설명 - 5-1195131-6 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |