전자부품 데이터시트 검색엔진
Selected language     Korean  ▼
부품명
         상세내용
Preview PDF Download HTML-1page HTML-10pages

KTX2_12 데이터시트(Datasheet) 2 Page - Radiometrix Ltd

부품명 KTX2_12
상세내용  UHF FM Code-Hopping Data Transmitter Module
PDF  8 Pages
Scroll/Zoom Zoom In 100% Zoom Out
제조사  RADIOMETRIX [Radiometrix Ltd]
홈페이지  http://www.radiometrix.com
Logo 

   
 2 page
background image
Radiometrix Ltd, KTX2 Data Sheet
page 2
Functional and operational description
The KTX2 transmitter module is a crystal based PLL controlled FM code-hopping transmitter with a pre-
programmed Electronic Serial Number (ESN), operating between 3V and 6V supply, at 433.92MHz. KTX2 is
designed to meet or exceed EN 300 220-3 standards for European use and delivers nominally +3dBm at 8mA
(for 5V supply). The module measures 36.2 x 15.2 x 4.5 mm.
The module is very easy to use: there are no modulation input or transmitter-enable pins. The activation of any
combination of the four function lines (S0 – S3) causes a data transmission, part of which is the status of S0 –
S3, i.e. the function code. In this way, up to 15 different control combinations can be sent from one module.
Simple pushbuttons can be connected directly between S0 – S3 and Vcc if desired. The module will transmit
repeatedly whilst any of the function lines is held high for up to 30 seconds (approx.), when a power-saving
time-out feature is activated.
Fig. 2: KTX2 block diagram
Vcc
(pin 4)
+3V to +6V DC supply. Max ripple content 0.1VP-P. Decoupling is not generally required.
S0
(pin 5)
Input (0) – activate high (>0.55Vcc – Vcc) to cause a transmission.
S1
(pin 6)
Input (1) – activate high (>0.55Vcc – Vcc) to cause a transmission.
S2
(pin 7)
Input (2) – activate high (>0.55Vcc – Vcc) to cause a transmission.
S3
(pin 8)
Input (3) – activate high (>0.55Vcc – Vcc) to cause a transmission.
Internal Use
(pin 9)
Modulation (Data). This pin is connected to the modulation input of the Transmitter, therefore do not connect
anything to this pin during operation of the module.
RF gnd
433.92 MHz
band pass
filter
buffer
1
RF out
Loop
Filter
Encoder
ref
osc
φ
5
2
supply
regulator
4
3 - 6Vcc
÷32
V C O
3
0V
6
7
8
9
S1
S0
S2
S3
Pin description:
RF OUT
(pin 1)
50Ω RF output to the antenna. Internally DC-
isolated. See antenna section of apps notes for
details of suitable antennas.
RF GND
(pin 2)
RF ground, internally connected to the module
screen and pin 3 (0V). This pin should be
directly connected to the RF return path - e.g.
coax braid, main PCB ground plane etc.
0V
(pin 3)
DC supply ground. Internally connected to pin 2
and module screen.
4.5 mm
36.2 mm
15.2
mm
15.7
mm
PCB level
Radiometrix
KTX2
9 holes, 0.7 mm dia, pin spacing 2.54 mm
Fig 3: KTX2 physical dimensions
15.24 mm
1
1 = RF OUT
2 = RF GND
3 = 0V
4 = Vcc
6 = S1
7 = S2
5 = S0
2
3
4
5
6
7
8
9
8 = S3
9 = Internal Use




Html 페이지

1  2  3  4  5  6  7  8 


데이터시트




링크 URL

ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ]  

Alldatasheet는?   |   광고문의    |   운영자에게 연락하기   |   개인정보취급방침   |   즐겨찾기   |   링크교환   |   제조사별 검색
All Rights Reserved© Alldatasheet.com 2003 - 2017    


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl