전자부품 데이터시트 검색엔진
KTX2_12 데이터시트(Datasheet) 7 Page - Radiometrix Ltd
RADIOMETRIX [Radiometrix Ltd]
Radiometrix Ltd, KTX2 Data Sheet
Duty Cycle requirements
The duty cycle is defined as the ratio, expressed as a percentage, of the maximum transmitter “on” time on one
or more carrier frequencies, relative to a one hour period. Where an acknowledgement message is required,
the additional transmitter “on” time shall be included.
There is a 10% duty cycle restriction on 433.050-434.790 MHz band in most of the EU member states.
The KTX2-433 is a RF module intended to be incorporated into a wide variety of applications and finished
products, Radiometrix has no control over the end use of the KTX2-433.The harmonised band 433.050 to
434.790 MHz as detailed in Annex 1 Band E of CEPT/ERC Recommendation 70-03 (which can be
downloaded at http://www.ero.dk/scripts/docmanag98/dm.dll/QueryDoc?Cat=Recommendation)
has list of countries where Duty Cycle restriction apply.
Module users should, therefore, ensure that they comply with the stated Duty Cycle requirements of the version
of CEPT/ERC Recommendation 70-03 in place at the time of incorporation of the KTX2-433 into their product.
It should be noted that the stated Duty Cycle must not be exceeded otherwise any approval granted for the
KTX2-433 will be invalidated.
Variants and ordering information
The KTX2 is available as a standard version:
The standard frequency is 433.92MHz, for other frequency variants, please contact sales
For all other variants please contact Sales department.
To make a complete code-hopping system:
Suitable Receiver module to use with KTX2:
Suitable Decoder IC for use with RX2A:
Or use a complete relay output board (includes RX2A module) for use with KTX2 modules (mapping
the four KTX2 function lines to four change-over relays)
ALLDATASHEET 가 귀하에 도움이 되셨나요?
[ DONATE ]
All Rights Reserved©
2003 - 2017
|   Chinese :
| German :
| Japanese :
| Russian :
| Spanish :
| French :
| Italian :
| Portuguese :
| Polish :