전자부품 데이터시트 검색엔진 |
|
UC3841DWG4 데이터시트(PDF) 1 Page - Texas Instruments |
|
UC3841DWG4 데이터시트(HTML) 1 Page - Texas Instruments |
1 / 11 page UC1841 UC2841 UC3841 Programmable, Off-Line, PWM Controller • All Control, Driving, Monitoring, and Protection Functions Included • Low-current, Off-line Start Circuit • Voltage Feed Forward or Current Mode Control • Guaranteed Duty Cycle Clamp • PWM Latch for Single Pulse per Period • Pulse-by-Pulse Current Limiting Plus Shutdown for Over-Current Fault • No Start-up or Shutdown Transients • Slow Turn-on Both Initially and After Fault Shutdown • Shutdown Upon Over- or Under-Voltage Sensing • Latch Off or Continuous Retry After Fault • PWM Output Switch Usable to 1A Peak Current • 1% Reference Accuracy • 500kHz Operation • 18 Pin DIL Package The UC1841 family of PWM controllers has been designed to increase the level of versatility while retaining all of the performance features of the earlier UC1840 devices. While still optimized for highly-efficient boot- strapped primary-side operation in forward or flyback power converters, the UC1841 is equally adept in implementing both low and high voltage input DC to DC converters. Important performance features include a low-current starting circuit, linear feed-forward for constant volt-second operation, and compatibility with either voltage or current mode topologies. In addition to start-up and normal regulating PWM functions, these de- vices include built in protection from over-voltage, under-voltage, and over-current fault conditions with the option for either latch-off or automat- ic restart. While pin compatible with the UC1840 in all respects except that the po- larity of the External Stop has been reversed, the UC1841 offers the fol- lowing improvements: 1. Fault latch reset is accomplished with slow start discharge rather than recycling the input voltage to the chip. 2. The External Stop input can be used for a fault delay to resist shutdown from short duration transients. 3. The duty-cycle clamping function has been characterized and specified. The UC1841 is characterized for -55°C to +125°C operation while the UC2841 and UC3841 are designed for -25°C to +85°C and 0°to +70°C, respectively. BLOCK DIAGRAM Note: Positive true logic, latch outputs high with set, reset has priority. 6/93 DESCRIPTION FEATURES |
유사한 부품 번호 - UC3841DWG4 |
|
유사한 설명 - UC3841DWG4 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |