TMP104EVM Software Overview

www.ti.com

5

TMP104EVM Software Overview

This section discusses how to use the TMP104EVM software.

5.1

Starting the TMP104EVM Software

The TMP104 software can be operated through the Windows Start menu. From Start, select All Programs;

then select the TMP104EVM program.

Figure 10 illustrates how the software should appear if the TMP104EVM is functioning properly.

Figure 10. TMP104EVM Software Interface

Figure 11 shows an error message that is displayed if the PC cannot communicate with the EVM. If you

receive this error message, first check to see that the USB extension cable is properly connected to both

the PC USB port and to the SM-USB-DIG platform. Another possible source for this error is a problem

with the PC USB Human Interface Device driver. Make sure that the device is recognized when the USB

cable is plugged in; recognition is indicated by a Windows-generated confirmation sound.

Figure 11. Communication Error with the TMP104EVM

10

TMP104EVM Evaluation Board and Software Tutorial

SBOU118

– October 2011

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated