www.ti.com

PARAMETER MEASUREMENT INFORMATION

From Output

Under Test

(see Note A)

LOAD CIRCUIT

S1

Open

GND

500

Ω

500

Ω

Output

Control

(low-level

enabling)

Output

Waveform 1

S1 at 6 V

(see Note B)

Output

Waveform 2

S1 at GND

(see Note B)

0 V

1.5 V

1.5 V

0 V

1.5 V

1.5 V

0 V

Input

VOLTAGE WAVEFORMS

PROPAGATION DELAY TIMES

VOLTAGE WAVEFORMS

ENABLE AND DISABLE TIMES

Output

Open

GND

TEST

S1

B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.

Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.

C. All input pulses are supplied by generators having the following characteristics: PRR

D. The outputs are measured one at a time, with one transition per measurement.

SN74ALVC164245-EP

16-BIT 2.5-V TO 3.3-V/3.3-V TO 5-V LEVEL-SHIFTING TRANSCEIVER

WITH 3-STATE OUTPUTS

SCAS774A – JUNE 2004 – REVISED SEPTEMBER 2005

V

Figure 1. Load Circuit and Voltage Waveforms

9