전자부품 데이터시트 검색엔진 |
|
TLP2303 데이터시트(PDF) 3 Page - Toshiba Semiconductor |
|
TLP2303 데이터시트(HTML) 3 Page - Toshiba Semiconductor |
3 / 13 page TLP2303 3 7. 7. 7. 7. Absolute Maximum Ratings (Note) (Unless otherwise specified, T Absolute Maximum Ratings (Note) (Unless otherwise specified, T Absolute Maximum Ratings (Note) (Unless otherwise specified, T Absolute Maximum Ratings (Note) (Unless otherwise specified, Taaaa = 25 = 25 = 25 = 25 )))) LED Detector Common Characteristics Input forward current Input forward current derating Input forward current (pulsed) Input forward current derating (pulsed) Peak transient input forward current Peak transient input forward current derating Input power dissipation Input power dissipation derating Input reverse voltage Output current Output current derating Output voltage Supply voltage Output power dissipation Output power dissipation derating Operating temperature Storage temperature Lead soldering temperature Isolation voltage (Ta ≥ 100 ) (Ta ≥ 100 ) (Ta ≥ 100 ) (Ta ≥ 100 ) (Ta ≥ 100 ) (Ta ≥ 100 ) (10 s) AC, 1 min., R.H. ≤ 60% Symbol IF ∆IF/∆Ta IFP ∆IFP/∆Ta IFPT ∆IFPT/∆Ta PD ∆PD/∆Ta VR IO ∆IO/∆Ta VO VCC PO ∆PO/∆Ta Topr Tstg Tsol BVS Note (Note 1) (Note 2) (Note 3) Rating 20 -0.2 40 -1.6 1 -40 100 -4.0 5 80 -3.2 -0.5 to 18 -0.5 to 18 100 -4.0 -40 to 125 -55 to 125 260 3750 Unit mA mA/ mA mA/ A mA/ mW mW/ V mA mA/ V mW mW/ Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width (PW) ≤ 1 ms, duty = 50 % Note 2: Pulse width (PW) ≤ 1 µs, 300 pps Note 3: This device is considered as a two-terminal device: Pins 1 and 3 are shorted together, and pins 4, 5 and 6 are shorted together. 8. 8. 8. 8. Recommended Operating Conditions (Note) Recommended Operating Conditions (Note) Recommended Operating Conditions (Note) Recommended Operating Conditions (Note) Characteristics Input on-state current Input off-state voltage Supply voltage Operating temperature Symbol IF(ON) VF(OFF) VCC Topr Note (Note 1) (Note 1) Min 0.5 0 4.5 -40 Typ. Max 15 0.8 18 125 Unit mA V V Note: The recommended operating conditions are given as a design guide necessary to obtain the intended performance of the device. Each parameter is an independent value. When creating a system design using this device, the electrical characteristics specified in this datasheet should also be considered. Note: A ceramic capacitor (0.1 µF) should be connected between pin 4 and pin 6 to stabilize the operation of a high- gain linear amplifier. Otherwise, this photocoupler may not switch properly. The bypass capacitor should be placed within 1 cm of each pin. Note 1: Denotes the operating range, not the recommended operating condition. 2012-12-26 Rev.1.0 |
유사한 부품 번호 - TLP2303 |
|
유사한 설명 - TLP2303 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |