전자부품 데이터시트 검색엔진 |
|
TS3553 데이터시트(PDF) 6 Page - Taiwan Semiconductor Company, Ltd |
|
TS3553 데이터시트(HTML) 6 Page - Taiwan Semiconductor Company, Ltd |
6 / 11 page TS3553 3A/350kHz Synchronous Buck DC/DC Converter 6/11 Version: B11 Application Information (Continue) Optional Schottky Diode A Schottky diode with low forward drop voltage and fast reverse recovery is the ideal choice for better efficiency. The forward drop voltage of a Schottky diode will result in the conduction losses in the diode, and the diode capacitance (CT or CD) will cause the switching losses. Therefore, it is necessary to consider both forward voltage drop and diode capacitance for diode selection. In addition, the rating of selected Schottky diode should be able to handle the input voltage and the maximum peak diode current. Input Capacitor the Output Capacitor To prevent the high input voltage ripple and noise resulted from high frequency switching, the use of low ESR ceramic capacitor for the maximum RMS current is recommended. The approximated RMS current of the input capacitor can be calculated according to the following formula. The selection of output capacitor depends on the required output voltage ripple. The output voltage ripple can be expressed as: For lower output voltage ripple, the use of low ESR ceramic capacitor is recommended. The tantalum capacitor can also be used well, but its ERS is larger than that of ceramic capacitor. When choosing the input and output ceramic capacitors, X5R and X7R types are recommended because they retain their capacitance over wider ranges of voltage and temperature than other types. Loop Compensation In order to avoid the poor output voltage ripple and low efficiency caused by instability, TS3553 requires a proper external compensation network to compensate its feedback loop. In this external compensation network, the compensation resistor, RC, and the compensation capacitor, CC, are used to set the high-frequency integrator gain and the integrator zero. C7 is used to cancel the zero caused by the output capacitor and it’s ESR. While using the ceramic capacitor as the output capacitor, C7 can be omitted due to the small ESR. The system has one pole of importance, due to the output capacitor, C3//C4 and the load resistor. This poles is located at: |
유사한 부품 번호 - TS3553 |
|
유사한 설명 - TS3553 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |