The copyright and authority for the interpretation of the products are reserved by MORNSUN

TDx12P485

2013.12.04-A/1

Page 3 of3

Note:

1. All specifications measured at Ta=25

°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.

2. In this datasheet, all the test setup and methods are based on our corporate standards.

3. All characteristics are meant for listed model, non-standard models may perform differently, you can contact MORNSUN FAE for more details.

4. Contact us for your specific requirement.

5. Specifications are subject to change without prior notice.

MORNSUN Science & Technology Co.,Ltd.

Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.

Tel: 86-20-38601850

Fax:86-20-38601272

E-mail: info@mornsun.cn

Http://www.mornsun-power.com

APPLICATION NOTICE

1. Please read the user manual carefully before using. If any question please contact our technical support department.

2. Please do not use this product in hazardous area.

3. To avoid invalid explosion protection function, or any failure, users disassemble this product is forbidden.

AFTER-SALES SERVICE

1. Products are carefully inspected and quality control during production and before shipment. If they operated abnormally or there were anything

wrong, please contact our agent where purchased or MORNSUN FAE as soon as possible.

2. MORNSUN warranty our product for 3 years from manufacturing date. During this peroid, MORNSUN will repair or replace the product if product

was found to have manufacturing defect.

APPLICATION GUIDE

See the communication interface product application guide.

TYPICAL APPLICATIONS CIRCUIT DIAGRAM

RXD

MCU

CON

VCC

TXD1

GND

VCC

RXD1

4 85Bus

TXD

3

4

5

1

2

CON1

TXD2

GND

VCC

RXD2

22

21

20

24

23

B1

A1

Vo

RGND

A2

Vo

B2

RGND

15

14

13

16

10

11

12

9

GND

The connecting of 2 channel and1 channel are the same

OUTLINE DIMENSIONS, RECOMMENDED FOOTPRINT & PACKAGING