전자부품 데이터시트 검색엔진 |
|
SM312FPH 데이터시트(PDF) 5 Page - List of Unclassifed Manufacturers |
|
SM312FPH 데이터시트(HTML) 5 Page - List of Unclassifed Manufacturers |
5 / 6 page Glass Fiber Installation O-ring Retaining Clip 1. Install the O-ring (supplied with the fiber) on each fiber end, as shown in the drawing. 2. While pressing the fiber ends firmly into the ports on the sensor front, slide the U-shaped retaining clip (supplied with the sensor) into the slot in the sensor’s barrel, until it snaps into place. Plastic Fiber Installation Trimmed fiber control ends Plastic fiber emitter port Plastic fiber receiver port Gripper Unlock Lock Adapters for 0.25- and 0.5-mm fibers Sensor Face 1. With supplied fiber cutter, make a clean cut at control ends of fibers. 2. Unlock the fiber gripper as shown below. Apply appropriate fiber adaptors prior to fiber insertion, if needed. 3. Gently insert the prepared fiber ends into the ports, as far as they will go. 4. Slide the fiber gripper back to lock, as shown below. MINI-BEAM dc-Voltage Series P/N 69943 rev. C www.bannerengineering.com - tel: 763-544-3164 5 |
유사한 부품 번호 - SM312FPH |
|
유사한 설명 - SM312FPH |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |