TC815 datasheet(6/26 Pages) MICROCHIP | 3-1/2 Digit Auto-Ranging A/D Converter with Triplex LCD Drive and Display Hold Function

6 page

TC815

DS21474B-page 6

ΩR1

Standard resistor connection for 200

Ω full scale.

ΩR2

Standard resistor connection for 2000

Ω full scale.

ΩR3

Standard resistor connection for 20k

Ω full scale range.

ΩR4

Standard resistor connection for 200k

Ω full scale range.

ΩR5

Standard resistor connection for 2000k

Ω full scale range.

VR3

Voltage measurement ÷ 100 attenuator.

VR2

Voltage measurement ÷ 10 attenuator.

VR5

Voltage measurement ÷ 10,000 attenuator.

VR4

Voltage measurement ÷ 1000 attenuator.

Unknown voltage input ÷ 1 attenuator.

Unknown current input.

ACVL

Low output of AC to DC converter.

Integrator capacitor connection. Nominally 0.1µf. (Low dielectric absorption. Polypropylene

dielectrics suggested.)

No connection.

CAZ

Auto-zero capacitor connection; nominally 0.1µf.

Unknown resistance input.

CFI

Input filter connection.

AD1

Negative input of internal AC to DC operational amplifier.

AD0

Output of internal AC to DC operational amplifier.

ΩBUF

Active buffer output for resistance measurement. Integration resistor connection. Integrator

resistor nominally 220k

Ω.

RVIBUF

Active buffer output for voltage and current measurement. Integration resistor connection.

Integration resistor nominally 150k

Ω.

ACVH

Positive output of AC to DC converter.

VSSA

Negative supply connection for analog circuits. Connect to negative terminal of 9V battery.

DGND

Internal logic digital ground. The logic “0” level. Nominally 4.7V below VCC.

RANGE

Input to set manual operation and change ranges.

HOLD

Input to hold display. Connect to DIG GND.

-MEM

Input to enter Memory Measurement mode for relative measurements. The two LSD’s are

stored and subtracted from future measurements.

DS/AC

Ω/LOWΩ

Input that selects AC or DC option during voltage/current measurements. For resistance

measurements,

Ω/LOWΩ, the ohms or low power (voltage) ohms option can be selected.

Input to select current measurement. Set to logic “0” (Digital ground) for

current measurement

No connection.

TABLE 2-1:

PIN FUNCTION TABLE (CONTINUED)

Pin Number

(64-Pin Plastic)

Quad Flat Package

Symbol

Description

부품명	상세내용	Html View	제조사
ICL7116	31/2 Digit LCD/LED Display A/D Converter with Display Hold	1 2 3 4 5 More	Intersil Corporation
AME811	3-1/2 Digit A/D Converter - Low Power With HOLD And Differential Reference Inputs	1 2 3 4 5 More	Analog Microelectronics
W91510DN	TONE/PULSE DIALER WITH RTC AND LCD DISPLAY FUNCTION	1 2 3 4 5 More	Winbond
NJU9203B	3.1/2 DIGIT SINGLE CHIP A/D CONVERTER WITH DISPLAY HOLD	1 2 3 4	New Japan Radio
MAX150	CMOS High Speed 8Bit A/D Converter with Refrence and Track/Hold Function	1 2 3 4 5 More	Maxim Integrated Products
ES51977	Integrated analog-to-digital converter ADC with 3 3/4 digits and 42-segment bargraph LCD display	1 2 3 4 5 More	List of Unclassifed Manufacturers
ICL7116	3½ Digit A/D Converter With Display Hold	1 2 3 4	Maxim Integrated Products
TC811	3-1/2 DIGIT A/D CONVERTER WITH HOLD AND DIFFERENTIAL REFERENCE INPUTS	1 2 3 4 5 More	TelCom Semiconductor, Inc
TC811	3-1/2 Digit Analog-To-Digital Converter with Hold and Differential Reference Inputs	1 2 3 4 5 More	Microchip Technology
LC75863E	1/3 Duty LCD Display Drivers with Key Input Function	1 2 3 4 5 More	Sanyo Semicon Device

관련 부품명

링크 URL

Alldatasheet 제휴사