전자부품 데이터시트 검색엔진 |
|
LM158AH-SMD 데이터시트(PDF) 7 Page - Texas Instruments |
|
|
LM158AH-SMD 데이터시트(HTML) 7 Page - Texas Instruments |
7 / 30 page LM158QML www.ti.com SNOSAP3F – JULY 2005 – REVISED MARCH 2013 SMD 5962–8771002, High Dose Rate DC Drift Parameters The following conditions apply, unless otherwise specified. All voltages referenced to device ground. Delta calculations are performed on QMLV devices at Group B, Subgroup 5 only. Sub- Parameter Test Conditions Notes Min Max Units groups VIO Input Offset Voltage +VCC = 30V, VCM = 0V, -0.5 0.5 mV 1 RS = 50Ω, VO = 1.4V +VCC = 30V, VCM = 28.5V, -0.5 0.5 mV 1 RS = 50Ω, VO = 1.4V +VCC = 5V, VCM = 0V, -0.5 0.5 mV 1 RS = 50Ω, VO = 1.4V ±IIB Input Bias Current +VCC = 5V, VCM = 0V See(1) -10 10 nA 1 (1) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the input lines. SMD 5962–8771002, High Dose Rate SMD 5962–8771002, High Dose Rate 100K Post Radiation Limits @ +25°C (1) DC Parameters The following conditions apply, unless otherwise specified. All voltages referenced to device ground. Parameter Test Conditions Notes Min Max Units Sub - groups VIO Input Offset Voltage +VCC = 30V, VCM = 0V, See(1) -4.0 4.0 mV 1 RS = 50Ω, VO = 1.4V +VCC = 30V, VCM = 28.5V, See(1) -4.0 4.0 mV 1 RS = 50Ω, VO = 1.4V +VCC = 5V, VCM = 0V, See(1) -4.0 4.0 mV 1 RS = 50Ω, VO = 1.4V ±IIB Input Bias Current +VCC = 5V, VCM = 0V See(1)(2) -60 -1.0 nA 1 ICC Power Supply Current +VCC = 5V, RL = 100K, See(1) 1.5 mA 1 VO = 1.4V (1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post Radiation Limits Table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate sensitivity. Radiation end point limits for the noted parameters are specified only for the conditions as specified in MIL-STD-883, per Test Method 1019, Condition A. (2) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the input lines. LM158A Electrical Characteristics SMD 5962–8771003 ELDRS Free Only DC Parameters The following conditions apply, unless otherwise specified. All voltages referenced to device ground. Sub- Parameter Test Conditions Notes Min Max Units groups ICC Power Supply Current +VCC = 5V, RL = 100K, 1.2 mA 1, 2, 3 VO = 1.4V +VCC = 30V, RL = 100K, 3.0 mA 1, VO = 1.4V 4.0 2, 3 VOH Output Voltage High +VCC = 30V, RL = 2KΩ 26 V 1, 2, 3 +VCC = 30V, RL = 10KΩ 27 V 1, 2, 3 VOL Output Voltage Low +VCC = 30V, RL = 10KΩ 40 mV 1 100 mV 2, 3 +VCC = 30V, ISink = 1µA 40 mV 1 100 mV 2, 3 +VCC = 5V, RL = 10KΩ 40 mV 1 100 mV 2, 3 Copyright © 2005–2013, Texas Instruments Incorporated Submit Documentation Feedback 7 Product Folder Links: LM158QML |
유사한 부품 번호 - LM158AH-SMD |
|
유사한 설명 - LM158AH-SMD |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |