전자부품 데이터시트 검색엔진 |
|
MCRF200ISN00A 데이터시트(PDF) 1 Page - Microchip Technology |
|
MCRF200ISN00A 데이터시트(HTML) 1 Page - Microchip Technology |
1 / 24 page 2003 Microchip Technology Inc. DS21219H-page 1 MCRF200 Features • Factory programming and memory serialization (SQTP SM) • One-time contactless programmable (developer kit only) • Read-only data transmission after programming • 96 or 128 bits of One-Time Programmable (OTP) user memory (also supports 48 and 64-bit protocols) • Typical operation frequency: 100 kHz-400 kHz • Ultra low-power operation (5 µA @ VCC = 2V) • Modulation options: - ASK, FSK, PSK • Data Encoding options: - NRZ Direct, Differential Biphase, Manchester Biphase • Die, wafer, COB, PDIP or SOIC package options • Factory programming options Application • Low-cost alternative for existing low-frequency RFID devices • Access control and time attendance • Security systems • Animal tagging • Product identification • Industrial tagging • Inventory control Package Type Description The MCRF200 is a passive Radio Frequency Identifi- cation (RFID) device for low-frequency applications (100 kHz-400 kHz). The device is powered by rectifying an incoming RF signal from the reader. The device requires an external LC resonant circuit to receive the incoming RF signal and to send data. The device develops a sufficient DC voltage for operation when its external coil voltage reaches approximately 10 VPP. This device has a total of 128 bits of user programmable memory and an additional 12 bits in its configuration register. The user can manually program the 128 bits of user memory by using a contactless programmer in a microID developer kit such as DV103001 or PG103001. However, in production volume the MCRF200 is programmed at the factory (Microchip SQTP – see Technical Bulletin TB023). The device is a One-Time Programmable (OTP) integrated circuit and operates as a read-only device after programming. MCRF200 Reader RF Signal Data PDIP/SOIC VA VB 1 2 3 4 8 7 6 5 NC I/O RESET NC VSS VCC Note: Pins 3, 4, 5 and 6 are for device test purposes only. Pins 1 and 8 are for antenna connections. DO NOT ground pin 5. 125 kHz microID™ Passive RFID Device |
유사한 부품 번호 - MCRF200ISN00A |
|
유사한 설명 - MCRF200ISN00A |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |