전자부품 데이터시트 검색엔진 |
|
CDC2510 데이터시트(PDF) 1 Page - Texas Instruments |
|
CDC2510 데이터시트(HTML) 1 Page - Texas Instruments |
1 / 13 page CDC2510 3.3V PHASELOCK LOOP CLOCK DRIVER SCAS597B − DECEMBER 1997 − REVISED DECEMBER 2004 1 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 D Use CDCVF2510A as a Replacement for this Device D Phase-Lock Loop Clock Distribution for Synchronous DRAM Applications D Distributes One Clock Input to One Bank of Ten Outputs D Single Output Enable Terminal Controls All Ten Outputs D External Feedback (FBIN) Pin Is Used to Synchronize the Outputs to the Clock Input D On-Chip Series Damping Resistors D No External RC Network Required D Operates at 3.3-V VCC D Packaged in Plastic 24-Pin Thin Shrink Small-Outline Package description The CDC2510 is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It is specifically designed for use with synchronous DRAMs. The CDC2510 operates at 3.3-V VCC and provides integrated series-damping resistors that make it ideal for driving point-to-point loads. One bank of ten outputs provide ten low-skew, low-jitter copies of CLK. Output signal duty cycles are adjusted to 50 percent, independent of the duty cycle at CLK. All outputs can be enabled or disabled via a single output enable input. When the G input is high, the outputs switch in phase and frequency with CLK; when the G input is low, the outputs are disabled to the logic-low state. Unlike many products containing PLLs, the CDC2510 does not require external RC networks. The loop filter for the PLL is included on-chip, minimizing component count, board space, and cost. Because it is based on PLL circuitry, the CDC2510 requires a stabilization time to achieve phase lock of the feedback signal to the reference signal. This stabilization time is required, following power up and application of a fixed-frequency, fixed-phase signal at CLK, as well as following any changes to the PLL reference or feedback signals. The PLL can be bypassed for test purposes by strapping AVCC to ground. The CDC2510 is characterized for operation from 0 °C to 70°C. FUNCTION TABLE INPUTS OUTPUTS G CLK 1Y (0:9) FBOUT X L L L L HL H H H H H Copyright 2004, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. CLK AVCC VCC 1Y9 1Y8 GND GND 1Y7 1Y6 1Y5 VCC FBIN 1 2 3 4 5 6 7 8 9 10 11 12 AGND VCC 1Y0 1Y1 1Y2 GND GND 1Y3 1Y4 VCC G FBOUT 24 23 22 21 20 19 18 17 16 15 14 13 PW PACKAGE (TOP VIEW) |
유사한 부품 번호 - CDC2510_15 |
|
유사한 설명 - CDC2510_15 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |