์ „์ž๋ถ€ํ’ˆ ๋ฐ์ดํ„ฐ์‹œํŠธ ๊ฒ€์ƒ‰์—”์ง„
  Korean  โ–ผ

Delete All
ON OFF
ALLDATASHEET.CO.KR

X  

Preview PDF Download HTML

AS9596 ๋ฐ์ดํ„ฐ์‹œํŠธ(HTML) 1 Page - UMPCO, Inc.

๋ถ€ํ’ˆ๋ช… AS9596
์ƒ์„ธ๋‚ด์šฉ  BRACKET, ANGLE, 90ยฐ, CADMIUM PLATED STEEL, UNSG41300, .190 BOLT
Download  2 Pages
Scroll/Zoom Zoom In 100% Zoom Out
์ œ์กฐ์‚ฌ  UMPCO [UMPCO, Inc.]
ํ™ˆํŽ˜์ด์ง€  http://www.umpco.com/index.php
Logo 

AS9596 ๋ฐ์ดํ„ฐ์‹œํŠธ(HTML) 1 Page - UMPCO, Inc.

   
Zoom Inzoom in Zoom Outzoom out
/ 2 page
 1 / 2 page
background image
THIS CATALOG PAGE IS FOR REFERENCE ONLY. REQUEST A
CERTIFIED UMPCO DRAWING FOR ACTUAL SPECIFICATIONS.
ANY
CONFLICT
BETWEEN
THIS
DOCUMENT
AND
THE
CERTIFIED DRAWING, THE CERTIFIED DRAWING WILL TAKE
PRECEDENCE. IF THE DOCUMENT IS CONTROLLED BY ANY
OTHER SOURCE THAN UMPCO, THE CERTIFIED DRAWING MUST
BE PURCHASED THROUGH THAT ORGANIZATION.
UMPCO, INC
CAGE CODE No. 18076
REV
A
7/28/2011
AS9596
BRACKET, ANGLE, 90ยฐ, CADMIUM PLATED STEEL, UNSG41300, .190 BOLT
PART NUMBER
7100 LAMPSON AVE * PO BOX 5158 * GARDEN GROVE, CA 92846-5158 SALES: (714) 897-3531 * BUS: (714) 897-3536 * FAX: (714) 897-2611
ร˜ .210/.200
R .500
.205
.195
.500
A
B
90ยฐ
MARK PART
NUMBER AND
MANUFACTURERโ€™S
IDENTIFICATION IAW
AS478 CLASS D
FIGURE 1 ANGLE BRACKET
DIRECTION OF GRAIN
SEE NOTE 6
.255
.245
.068
.056
R .125
R .500
ร˜ .210/.200
.205
.195
REQUIREMENTS:
1.
MATERIAL: STEEL IN ACCORDANCE WITH AMS 6350, HARDEN (OIL QUENCH) AND TEMPER TO
ROCKWELL 32-38 HRC PER ASTM E18.
2.
FINISH: CADMIUM PLATE IN ACCORDANCE WITH AMS 2400. DIMENSIONS SPECIFIED ARE
AFTER PLATING.
3.
REMOVE BURRS AND BREAK EDGES
4.
APPROXIMATE WEIGHT LB/100 = .877 (A+B) + .157.
5.
TOLERANCES UNLESS OTHERWISE SPECIFIED, TOLERANCES SHALL BE FOR LINEAR
DIMENSIONS ยฑ.010, ANGULAR ยฑ5ยฐ.
6.
GRAIN FLOW SHALL BE PARALLEL WITH ROLLING DIRECTION
7.
PART NUMBER: THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBER FOLLOWED BY A
DASH NUMBER FROM TABLE 1.
EXAMPLE: MS9596-005
DASH NUMBER
BASIC MS NUMBER
MS9596-005 INDICATES โ€“ BRACKET, ANGLE, 90ยฐ, STEEL, .190 BOLT,
LENGTH A, .438, LENGTH B, .438.
NOTES:
1.
DIMENSIONS ARE IN INCHES.
WARNING:
THIS DOCUMENT INCLUDES CADMIUM AS A PLATING MATERIAL. THE USE OF CADMIUM HAS BEEN
RESTRICTED AND/OR BANNED FOR USE IN MANY COUNTRIES DUE TO ENVIRONMENTAL AND HEALTH
CONCERNS. THE USER SHOULD CONSULT WITH LOCAL OFFICIALS ON THE ENVIRONMENTAL AND HEALTH
REGULATIONS REGARDING ITS USE.
MS9596-XXX


Html Pages

1  2 


๋ฐ์ดํ„ฐ์‹œํŠธ Download




๋งํฌ URL



Privacy Policy
ALLDATASHEET.CO.KR
ALLDATASHEET ๊ฐ€ ๊ท€ํ•˜์— ๋„์›€์ด ๋˜์…จ๋‚˜์š”?  [ DONATE ]  

Alldatasheet๋Š”?   |   ๊ด‘๊ณ ๋ฌธ์˜    |   ์šด์˜์ž์—๊ฒŒ ์—ฐ๋ฝํ•˜๊ธฐ   |   ๊ฐœ์ธ์ •๋ณด์ทจ๊ธ‰๋ฐฉ์นจ   |   ์ฆ๊ฒจ์ฐพ๊ธฐ   |   ๋งํฌ๊ตํ™˜   |   ์ œ์กฐ์‚ฌ๋ณ„ ๊ฒ€์ƒ‰
All Rights Reservedยฉ Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn