전자부품 데이터시트 검색엔진 |
|
HCPL-5120 데이터시트(PDF) 7 Page - Agilent(Hewlett-Packard) |
|
HCPL-5120 데이터시트(HTML) 7 Page - Agilent(Hewlett-Packard) |
7 / 16 page 7 Package Characteristics Over recommended operating conditions (TA = -55 to +125°C) unless otherwise specified. *All typicals at TA = 25°C. Notes: 1. Maximum pulse width = 10 µs, maximum duty cycle = 0.2%. This value is intended to allow for component tolerances for designs with I O peak minimum = 2.0 A. See Applications section for additional details on limiting IOH peak. 2. Maximum pulse width = 50 µs, maximum duty cycle = 0.5%. 3. In this test VOH is measured with a dc load current. When driving capacitive loads VOH will approach VCC as IOH approaches zero amps. 4. Maximum pulse width = 1 ms, maximum duty cycle = 20%. 5. This is a momentary withstand test, not an operating condition. 6. Device considered a two-terminal device: pins on input side shorted together and pins on output side shorted together. 7. The difference between tPHL and tPLH between any two HCPL-5120 parts under the same test condition. 8. Pins 1 and 4 need to be connected to LED common. 9. Common mode transient immunity in the high state is the maximum tolerable dVCM/dt of the common mode pulse, VCM, to assure that the output will remain in the high state (i.e., VO > 15.0 V). 10. Common mode transient immunity in a low state is the maximum tolerable dVCM/dt of the common mode pulse, VCM, to assure that the output will remain in a low state (i.e., VO < 1.0 V). 11. This load condition approximates the gate load of a 1200 V/75A IGBT. 12. Pulse Width Distortion (PWD) is defined as |tPHL-tPLH| for any given device. 13. Standard parts receive 100% testing at 25 °C (Subgroups 1 and 9). SMD and Class H parts receive 100% testing at 25, 125, and -55°C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively). 14. Parameters are tested as part of device initial characterization and after design and process changes. Parameters are guaranteed to limits specified for all lots not specifically tested. Parameter Symbol Test Conditions Group A Subgroups (13) Limits Units Fig Note Min. Typ.* Max. Input-Output Leakage Current II-O VI-O = 1500Vdc RH = 45%, t = 5 sec., TA = 25°C 1 1.0 µA 5, 6 Resistance (Input-Output) RI-O VI-O = 500 VDC 1010 Ω 6 Capacitance (Input-Output) CI-O f = 1 MHz 2.5 pF 6 |
유사한 부품 번호 - HCPL-5120 |
|
유사한 설명 - HCPL-5120 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |