TC83230-0021/JTC83230-0021S

2003-03-24

11

[P/NP]................... Switches between PRINT and NON-PRINT mode. At reset, NON-PRINT mode is

set. Switches mode in each time when the [P/NP] key is pressed:

P ® NP ® P ® NP. In PRINT mode, displays “print mode”. Valid only when the

[ L

T/

] lock key is set to T.

[RND] ................... Switches between round-up, round-off and half-adjust. At reset, half-adjust is set.

Switches the mode in each time when the [RND] key is pressed:

5/4 ® ¯ ® ­ ® 5/4 ® ¯ ® ­. Displays round-up/round-off. Valid only when the

[ L

T/

] lock key is set to T.

[DEC].................... Switches the decimal point. At reset, floating point (F) is set. Switches the mode in

each time when the [DEC] key is pressed as follows:

F ® 0 ® 1 ® 2 ® 3 ® 4 ® 6 ® A ® F ® 0 ® 1. Displays the specified decimal

point or add mode. Valid only when the [ L

T/

] lock key is set to T.

[TM･S].................. Sets time and date. Pressing the [TM･S] key in clock/date display mode sets time

setting mode. Valid only when the [TIME] lock key is set.

[RT･S]................... If pressed after key entry, sets the conversion rate.

>

[A ® B]................. When the [TIME] key is on, moves the cursor to the right as the [>] key.

When the [CAL] key is on, executes rate conversion as the [A ® B] key.

Example of [A ® B] key operation when rate value is 130:

a [A ® B].................. a130

Pressing the < [A ® B] key after clearing display calls the rate value.

<

[B ® A]................. When the [TIME] key is on, moves the cursor to the left as the [<] key.

When the [CAL] key is on, executes rate conversion as [B ® A] key.

Example of [B ® A] key operation when rate value is 130:

a [B ® A].................. a/130

Pressing the < [B ® A] key after clearing display calls the rate value.