 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
ADP1048WARQZ-R7 데이터시트(PDF) 46 Page - Analog Devices |
|
||||||||||||||||||||||||||||||
ADP1048WARQZ-R7 데이터시트(HTML) 46 Page - Analog Devices |
|
|
46 / 82 page  ADP1048W Data Sheet RESTORE_USER_ALL COMMAND Code 0x16, send byte, no data. This command downloads the stored user settings from EEPROM into operating memory. CAPABILITY REGISTER This register allows host systems to determine the capabilities of the PMBus device. Table 20. Register 0x19—CAPABILITY Bits Bit Name R/W Description 7 Packet error checking R Always reads as 0. Packet error checking (PEC) is not supported. [6:5] Maximum bus speed R Return the device PMBus speed capability. These bits are hardcoded to a value of 01 (use the 400 kHz maximum bus speed). 4 SMBALERT# R Always reads as 0. SMBALERT# pin and SMBus alert response protocol not supported. [3:0] RSVD R Reserved. VOUT_MODE REGISTER This register sets and reads the format (linear, VID, direct) and exponents for VOUT related commands. Table 21. Register 0x20—VOUT_MODE Bits Bit Name R/W Description [7:5] Mode R Return the output voltage data format. This bit is hardcoded to use linear format. [4:3] RSVD R Reserved. [2:0] Exponent R/W Specify the exponent (N) used in VOUT linear mode format (X = Y × 2N). The exponent is in twos complement format. VOUT_COMMAND REGISTER This register sets VOUT to the configured value. Table 22. Register 0x21—VOUT_COMMAND Bits Bit Name R/W Description [15:12] RSVD R Reserved. Always reads as 0000. [11:0] Mantissa R/W Mantissa (Y[11:0]) used in VOUT linear mode format (X = Y × 2N). VOUT_SCALE_LOOP REGISTER This register sets the K factor = VADCVOUT. Table 23. Register 0x29—VOUT_SCALE_LOOP Bits Bit Name R/W Description [15:11] Exponent R/W Write the exponent (N) in twos complement format for K = Y × 2N. 10 RSVD R Always reads as 0. [9:0] Mantissa R/W Mantissa (Y[9:0]) used in K linear mode format (K = Y × 2N). VOUT_SCALE_MONITOR REGISTER This register sets the Kr factor = VOUTVADC. Table 24. Register 0x2A—VOUT_SCALE_MONITOR Bits Bit Name R/W Description [15:14] RSVD R Reserved. [13:11] Exponent R/W Write the exponent (N) in twos complement format for Kr = Y × 2N. 10 RSVD R Always reads as 0. [9:0] Mantissa R/W Mantissa (Y[9:0]) used in Kr linear mode format (Kr = Y × 2N). Rev. 0 | Page 46 of 82 |
유사한 부품 번호 - ADP1048WARQZ-R7 |
|
유사한 설명 - ADP1048WARQZ-R7 |
|
|
링크 URL |
| 개인정보취급방침 |
| ALLDATASHEET.CO.KR |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
