전자부품 데이터시트 검색엔진 |
|
NB2780A 데이터시트(PDF) 4 Page - ON Semiconductor |
|
NB2780A 데이터시트(HTML) 4 Page - ON Semiconductor |
4 / 8 page NB2780A http://onsemi.com 4 Table 4. DC ELECTRICAL CHARACTERISTICS FOR 2.5 V SUPPLY (Test Conditions: All parameters are measured at room temperature 25°C) Symbol Description Min Typ Max Unit VIL Input LOW Voltage GND − 0.3 0.8 V VIH Input HIGH Voltage 2.0 VDD + 0.3 V IIL Input LOW Current −35 mA IIH Input HIGH Current 35 mA IXOL XOUT Output LOW Current (@ 0.6 V, VDD = 2.5 V) 3.0 mA IXOH XOUT Output HIGH Current (@ 1.8 V, VDD = 2.5 V) 3.0 mA VOL Output LOW Voltage (VDD = 2.5 V, IOL = 8.0 mA) 0.6 V VOH Output HIGH Voltage (VDD = 2.5 V, IOH = 8.0 mA) 1.8 V IDD Static Supply Current (Note 1) 10 mA ICC Dynamic Supply Current (2.5 V, 46 MHz, and No Load) 4.0 mA VDD Operating Voltage 2.375 2.5 2.625 V tON Powerup Time (first locked cycle after powerup) (Note 2) 5.0 mS ZOUT Clock Output Impedance 50 W NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. XIN/CLKIN pin and PD are pulled low. 2. VDD and XIN/CLKIN input are stable, PD pin is made high from low. Table 5. AC ELECTRICAL CHARACTERISTICS FOR 2.5 V SUPPLY Symbol Description Min Typ Max Unit CLKIN Input Frequency 30 50 MHz ModOUT Output Frequency 30 50 MHz fd Frequency Deviation Input Frequency = 30 MHz Input Frequency = 50 MHz ±1.10 ±0.62 % tLH (Note 3) Output Rise Time (measured at 0.7 V to 1.7 V) 0.7 1.3 1.6 ns tHL (Note 3) Output Fall Time (measured at 1.7 V to 0.7 V) 0.4 0.8 1.0 ns tJC Jitter (Cycle−to−Cycle) 200 ps tD Output Duty Cycle 45 50 55 % NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 3. tLH and tHL are measured at capacitive load of 15 pF. |
유사한 부품 번호 - NB2780A |
|
유사한 설명 - NB2780A |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |