전자부품 데이터시트 검색엔진 |
|
MPXAZ6115A 데이터시트(PDF) 3 Page - Freescale Semiconductor, Inc |
|
MPXAZ6115A 데이터시트(HTML) 3 Page - Freescale Semiconductor, Inc |
3 / 15 page MPXAZ6115A Sensors Freescale Semiconductor 3 Table 2. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2) Characteristic Symbol Min Typ Max Unit Pressure Range POP 15 — 115 kPa Supply Voltage(1) 1. Device is ratiometric within this specified excitation range. VS 4.75 5.0 5.25 Vdc Supply Current Io —6.0 10 mAdc Minimum Pressure Offset(2) (0 to 85 °C) @ VS = 5.0 Volts 2. Offset (Voff) is defined as the output voltage at the minimum rated pressure. Voff 0.133 0.200 0.268 Vdc Full Scale Output(3) (0 to 85 °C) @ VS = 5.0 Volts 3. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure. VFSO 4.633 4.700 4.768 Vdc Full Scale Span(4) (0 to 85 °C) @ VS = 5.0 Volts 4. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure. VFSS 4.433 4.500 4.568 Vdc Accuracy(5) (0 to 85 °C) 5. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span at 25 °C due to all sources of error including the following: • Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range. • Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied. • Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from minimum or maximum rated pressure at 25 °C. • TcSpan: Output deviation over the temperature range of 0 ° to 85°C, relative to 25°C. • TcOffset: Output deviation with minimum pressure applied, over the temperature range of 0 ° to 85°C, relative to 25°C. ——— ±1.5 %VFSS Sensitivity V/P — 45.9 — mV/kPa Response Time(6) 6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure. tR —1.0 — ms Warm-Up Time(7) 7. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the pressure has been stabilized. —— 20 — ms Offset Stability(8) 8. Offset Stability is the product's output deviation when subjected to 1000 cycles of Pulsed Pressure, Temperature Cycling with Bias Test. —— ±0.25 — %VFSS |
유사한 부품 번호 - MPXAZ6115A |
|
유사한 설명 - MPXAZ6115A |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |