(1/2)

001-05 / 20061022 / e9421_mcz1210_3.fm

• All specifications are subject to change without notice.

Chip Beads(SMD Array)

For Audio Signal Line

MCZ Series MCZ1210-T Type(3-Line)

This is a common type bead product that removes the noise

components in a signal line and includes beads for three lines in a

single chip. The product exhibits substantial impedance character-

istics in the high frequency range and is therefore capable of effec-

tively removing differential mode noises.

Additionally, an appropriate amount of magnetic coupling is creat-

ed between the beads of the three lines, giving the product the

capability to remove not only differential mode noise but common

mode noise as well. It is encased in a 1210 casing. This is an SMD

product that allows for automatic mounting by taping.

FEATURES

• Compact size and for three lines

• Capable of removing both common and differential mode noises.

• Closed magnetic circuit structure allows high-density installation

while preventing crosstalk between circuits.

APPLICATIONS

Audio signal lines used in cell phones and mobile audio devices.

PRODUCT IDENTIFICATION

(1) Series name

(2) Dimensions L

× W

(3) Material code

(4) Number of line

(5) Impedance

201: 200

Ω at 100MHz

(6) Packaging style

T:Taping

SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD

PATTERN

CIRCUIT DIAGRAM

TEMPERATURE RANGES

PACKAGING STYLE AND QUANTITIES

HANDLING AND PRECAUTIONS

• Before soldering, be sure to preheat components. The preheat-

ing temperature should be set so that the temperature difference

between the solder temperature and product temperature does

not exceed 150°C.

• After mounting components onto the printed circuit board, do not

apply stress through board bending or mishandling.

• The inductance value may change due to magnetic saturation if

the current exceeds the rated maximum.

• Do not expose the inductors to stray magnetic fields.

• Avoid static electricity discharge during handling.

• When hand soldering, apply the soldering iron to the printed cir-

cuit board only. Temperature of the iron tip should not exceed

350°C. Soldering time should not exceed 3 seconds.

Conformity to RoHS Directive

MCZ 1210 C

T 201 T

(1)

(2)

(3) (4) (5) (6)

Operating/Storage

–40 to +85°C

Packaging style

Quantity

Taping

4000 pieces/reel

1.25

±0.1

0.475

±0.1

0.225

±0.1

123

654

0.225

0.25

Dimensions in mm

• No polarity

12

3

65

4

• Please contact our Sales office when your application are considered the following:

The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.