전자부품 데이터시트 검색엔진 |
|
ST72E631K1B0 데이터시트(PDF) 9 Page - STMicroelectronics |
|
ST72E631K1B0 데이터시트(HTML) 9 Page - STMicroelectronics |
9 / 109 page ST7263 9/109 1.3 EXTERNAL CONNECTIONS The following figure shows the recommended ex- ternal connections for the device. The VPP pin is only used for programming OTP and EPROM devices and must be tied to ground in user mode. The 10 nF and 0.1 µF decoupling capacitors on the power supply lines are a suggested EMC per- formance/cost tradeoff. The external reset network is intended to protect the device against parasitic resets, especially in noisy environments. Unused I/Os should be tied high to avoid any un- necessary power consumption on floating lines. An alternative solution is to program the unused ports as inputs with pull-up. Figure 4. Recommended External Connections VPP VDD VSS OSCIN OSCOUT RESET VDD 0.1µF + See Clocks Section VDD 0.1µF 0.1µF EXTERNAL RESET CIRCUIT Or configure unused I/O ports Unused I/O 10nF 4.7K 10K by software as input with pull-up VDD Detector (LVD) is used Optional if Low Voltage |
유사한 부품 번호 - ST72E631K1B0 |
|
유사한 설명 - ST72E631K1B0 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |