전자부품 데이터시트 검색엔진 |
|
ADE7169 데이터시트(PDF) 1 Page - Analog Devices |
|
ADE7169 데이터시트(HTML) 1 Page - Analog Devices |
1 / 148 page Single-Phase Energy Measurement IC with 8052 MCU, RTC and LCD driver Preliminary Technical Data ADE75xx/ADE71xx Rev. PrE 01/07 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.326.8703 © 200 7 Analog Devices, Inc. All rights reserved. GENERAL FEATURES Wide supply voltage operation 2.4 to 3.7V Battery supply input with Automatic switch-over Reference 1.2 V ± 1% (drift 50 ppm/°C Maximum) 64-Lead Quad Flat (LQFP) or Chip Scale (LCSP) Lead Free Packages1 Operating Temperature -40°C to 85°C ENERGY MEASUREMENT FEATURES High accuracy active, reactive energy measurement IC, supports IEC 62053-21, 62053-22, 62053-23 Two differential inputs with PGAs to support Shunt, Current Transformer and di/dt current sensors Selectable Digital integrator to support di/dt current sensor Digital parameters for Gain, offset and phase compensation Selectable No-load threshold level for Watt, VA, and VAR anti-creep Less than 0.1% error on active energy over a dynamic range of 1000 to 1 @ 25C Less than 0.5% error on reactive energy over a dynamic range of 1000 to 1 @ 25C Less than 0.5% error on rms measurements over a dynamic range of 1000 to 1 for current and 100:1 for voltage @ 25C Auto-calibration of offsets High frequency outputs supply proportional to Irms, active, reactive or apparent power Proprietary ADCs and DSP provide high accuracy over large variations in environmental conditions and time Temperature monitoring 1 Please contact your Analog Devices representative to check availability of this package MICROPROCESSOR FEATURES 8052 based core Single-cycle 4MIPS 8052 core 8052 compatible instruction set 32.768 kHz external crystal with on-chip PLL Two external interrupt sources External reset pin Real Time Clock Counter for seconds, minutes and hours Automatic battery switchover for RTC back up Ultra-Low Battery Supply Current < 1 μA Software clock calibration with temperature and offset compensation Integrated LCD driver 104-segment with 2, 3 or 4 Multiplexer 3V/5V driving capability Internally generated LCD drive voltages Temperature and Supply compensated drive voltages Low power battery mode Wake-up from I/O and UART LCD driver capability On-chip peripherals UART, SPI or I2C Watch-Dog timer Power Supply Monitoring with User Selectable Levels Memory: 16kBytes Flash Memory, 512 Bytes RAM Development tools Single pin emulation IDE based assembly and C source debugging GENERAL DESCRIPTION The ADE75xx/ADE71xx integrates Analog Devices Energy (ADE) Metering IC analog front end and fixed function DSP solution with an enhanced 8052 MCU core, a RTC, an LCD driver and all the peripherals to make an electronic energy meter with LCD display with a single part. The ADE Energy Measurement core includes Active, Reactive, Apparent Energy calculations, as well as voltage and current rms measurements. This information is ready to use for energy billing by using built-in energy scalars. Many power line supervisory features like SAG, Peak, Zero-crossing are also included in the energy measurement DSP to simplify energy meter design. The microprocessor functionality includes a single cycle 8052 core, a Real Time Clock with a power supply back-up pin, a UART, and a SPI or I2C interface. The ready to use information from the ADE core reduces the program memory size requirement thus making it easy to integrate complicated design in 16k Bytes of Flash memory. The ADE75xx/ADE71xx also includes a 108/104-segment LCD driver respectively. This driver generates voltages capable of driving 5V LCDs. |
유사한 부품 번호 - ADE7169 |
|
유사한 설명 - ADE7169 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |