CDB5467U

DS714DB1

9

2.3.1

Setup Menu

Setup allows user to establish a USB communication connection with CDB5467U board or select a pre-

viously saved data file for further analysis.

If the USB item in the Setup menu is selected, the evaluation software will poll the CDB5467U, verifying

the serial communication link is ready. At this point, the USB menu item is checked indicating that the PC

has successfully communicated with CDB5467U evaluation board, and device and micro-code version

information are read from the board and displayed on the screen. See Figure 3. Due to improvements to

the software or new features being added, the version displayed may be different than the image shown

here.

Figure 3. Setup Menu Showing Successful USB Connection

If the evaluation software is unable to establish a communication link with the CDB5467U board, a mes-

sage will appear, indicating that the initial communication has failed. See Figure 4.

Figure 4. USB Error Message

Check to verify that the USB cable is connected properly and the power supply is on and connected prop-

erly to the CDB5467U. Reset the board (press the RESET button on the board) and try to setup the USB

connection again.