전자부품 데이터시트 검색엔진 |
|
TLE6250CV33 데이터시트(PDF) 9 Page - Infineon Technologies AG |
|
TLE6250CV33 데이터시트(HTML) 9 Page - Infineon Technologies AG |
9 / 26 page TLE6250 Data Sheet 9 Rev. 4.0, 2008-04-28 In the normal mode the device is able to receive and to transmit messages whereas in the receive-only mode signals at the TxD input are not transmitted to the CAN bus. The receive-only mode can be used for diagnostic purposes (to check the bus connections between the nodes) as well as to prevent the bus being blocked by a faulty permanent dominant TxD input signal. The stand-by mode is a low power mode that disables both, the receiver as well as the transmitter. In case the receive-only feature is not used the RM pin has to be left open. When the stand-by mode is not used the INH pin has to be connected to ground level in order to switch the TLE6250G in normal mode. Application Information for the 3.3 V Versions The TLE6250GV33 can be used for both; 3.3 V and 5 V microcontroller logic supply, as shown in Figure 6. Don’t apply external resistors between the power supply and this pin. This may cause a voltage drop and so reduce the available voltage at this pin. |
유사한 부품 번호 - TLE6250CV33 |
|
유사한 설명 - TLE6250CV33 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |