전자부품 데이터시트 검색엔진 |
|
LB1846M 데이터시트(PDF) 4 Page - Sanyo Semicon Device |
|
LB1846M 데이터시트(HTML) 4 Page - Sanyo Semicon Device |
4 / 8 page Block Diagrams [LB1846M] [LB1848M] Note: When the “soft off” function is used, a capacitor must be connected to the SOF pin. If this function is not used, this pin must be left open with absolutely no signals or lines connected. Notes on Wiring and Lines Since large currents flow in the VCC and ground lines, oscillations may occur on these lines. The following points should be observed if such oscillations occur. (1) Lower the line impedances by making them shorter and thicker. (2) Attach capacitors close to the IC. (3) If the controller (CPU) is mounted on a separate printed circuit board, insert series resistors (of about 10 k Ω) between the controller outputs and this IC. No. 5339-4/8 LB1846M, 1848M |
유사한 부품 번호 - LB1846M_99 |
|
유사한 설명 - LB1846M_99 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |