전자부품 데이터시트 검색엔진 |
|
Q67121-C967 데이터시트(PDF) 42 Page - Siemens Semiconductor Group |
|
Q67121-C967 데이터시트(HTML) 42 Page - Siemens Semiconductor Group |
42 / 67 page C167CR Semiconductor Group 39 Notes 1) This specification is not valid for outputs which are switched to open drain mode. In this case the respective output will float and the voltage results from the external circuitry. 2) The maximum current may be drawn while the respective signal line remains inactive. 3) The minimum current must be drawn in order to drive the respective signal line active. 4) This specification is only valid during Reset, or during Hold- or Adapt-mode. Port 6 pins are only affected, if they are used for CS output and the open drain function is not enabled. 5) Not 100 % tested, guaranteed by design characterization. 6) The supply current is a function of the operating frequency. This dependency is illustrated in the figure below. These parameters are tested at VCCmax and 20 MHz CPU clock with all outputs disconnected and all inputs at VIL or VIH. 7) This parameter is tested including leakage currents. All inputs (including pins configured as inputs) at 0 V to 0.1 V or at VCC – 0.1 V to VCC, VREF = 0 V, all outputs (including pins configured as outputs) disconnected. 8) Overload conditions occur if the standard operatings conditions are exceeded, i.e. the voltage on any pin exceeds the specified range (i.e. VOV > VCC + 0.5 V or VOV < VSS – 0.5V). The absolute sum of input overload currents on all port pins may not exceed 50 mA. Port 6 active current 4) I P6L 3) – 500 – µA V OUT = VOL1max PORT0 configuration current 4) I P0H 2) – – 10 µA V IN = VIHmin I P0L 3) – 100 – µA V IN = VILmax XTAL1 input current I IL CC – ± 20 µA 0 V < V IN < VCC Pin capacitance 5) (digital inputs/outputs) C IO CC – 10 pF f = 1 MHz T A = 25 °C Power supply current I CC – 20 + 5 × f CPU mA RSTIN = V IL2 f CPU in [MHz] 6) Idle mode supply current I ID – 20 + 2 × f CPU mA RSTIN = V IH1 f CPU in [MHz] 6) Power-down mode supply current I PD – 100 µA V CC = 5.5 V 7) Parameter Symbol Limit Values Unit Test Condition min. max. |
유사한 부품 번호 - Q67121-C967 |
|
유사한 설명 - Q67121-C967 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |