![]() |
전자부품 데이터시트 검색엔진 |
|
MCR106 데이터시트(HTML) 2 Page - Motorola, Inc |
|
MCR106 데이터시트(HTML) 2 Page - Motorola, Inc |
2 / 4 page ![]() MCR106 Series 2 Motorola Thyristor Device Data MAXIMUM RATINGS — continued Rating Symbol Value Unit Storage Temperature Range Tstg –40 to +150 °C Mounting Torque(1) — 6 in. lb. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 3 °C/W Thermal Resistance, Junction to Ambient R θJA 75 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C and RGK = 1000 Ohms unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM) TJ = 25°C TJ = 110°C IDRM, IRRM — — — — 10 200 µA µA Forward “On” Voltage (ITM = 4 A Peak) VTM — — 2 Volts Gate Trigger Current (Continuous dc)(2) (VAK = 7 Vdc, RL = 100 Ohms) (VAK = 7 Vdc, RL = 100 Ohms, TC = –40°C) IGT — — — — 200 500 µA Gate Trigger Voltage (Continuous dc) (VAK = 7 Vdc, RL = 100 Ohms, TC = 25°C) VGT — — 1 Volts Gate Non-Trigger Voltage (VAK = Rated VDRM, RL = 100 Ohms, TJ = 110°C) VGD 0.2 — — Volts Holding Current (VAK = 7 Vdc, TC = 25°C) IH — — 5 mA Forward Voltage Application Rate (TJ = 110°C) dv/dt — 10 — V/ µs 1. Torque rating applies with use of compression washer (B52200-F006 or equivalent). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. (See AN209B). For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200 °C. For optimum results, an activated flux (oxide removing) is recommended. 2. RGK current is not included in measurement. |