전자부품 데이터시트 검색엔진 |
|
EZR-LEDK2W-868 데이터시트(PDF) 7 Page - Silicon Laboratories |
|
EZR-LEDK2W-868 데이터시트(HTML) 7 Page - Silicon Laboratories |
7 / 14 page Si4455-2Wa yLink-DEMO Rev. 0.1 7 2.4.1. Menu States 2.4.1.1. Ready State In Ready state the demo waits for command. This is the default state of the demo. The demo starts in Ready state after switched on and goes to Ready state after leaving the configuration menu. PB1 can push the demo to RX state. State display: LED3 is on LED1-LED2 and LED4 is off by default Option: PB1: switches to RX state 2.4.1.2. RX State In RX state the node waits for incoming packets with the same node address. If packet is received it sends ACK packet and recalculates the PER. State display: LED1 is on LED2–4 is off by default LED2 blinks if packet received LED3 & LED4 shows the actual PER (see Table 4) Buzzer informs about actual PER (see Table 4) Options: PB1: switches to TX state PB3: switches to Ready state PB4: resets PER (only receiver’s PER will be reset) PB2 + PB4: switches to the configuration menu Table 4. Packet Error Rate on the LEDs and Buzzer LED3 LED4 Buzz PER < 1% off off off PER > 1% on off 1 Hz PER > 5% off on 2 Hz PER > 20% on on on |
유사한 부품 번호 - EZR-LEDK2W-868 |
|
유사한 설명 - EZR-LEDK2W-868 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |