전자부품 데이터시트 검색엔진
Selected language     Korean  ▼
부품명
         상세내용
Preview PDF Download HTML-1page HTML-10pages

TDA02H0SK1 데이터시트(Datasheet) 6 Page - Texas Instruments

부품명 TDA02H0SK1
상세내용  TLV320AIC3104EVM and TLV320AIC3104EVM-PDK
PDF  60 Pages
Scroll/Zoom Zoom In 100% Zoom Out
제조사  TI1 [Texas Instruments]
홈페이지  http://www.ti.com
Logo 

 
 6 page
background image
www.ti.com
2.3
Analog Signal Connections
2.3.1
Analog Inputs
2.3.2
Analog Output
2.4
Digital Signal Connections
2.4.1
Digital Inputs and Outputs
2.4.2
Digital Controls
2.5
Power Connections
EVM Description and Basics
Table 2. List of Jumpers (continued)
Default
Jumper
Position
Jumper Description
JMP14
Installed
When installed, shorts across the output capacitor on HPLCOM; remove this jumper if using AC-coupled output drive
JMP15
Installed
When installed, shorts across the output capacitor on HPROUT; remove this jumper if using AC-coupled output drive
JMP16
Installed
When installed, shorts HPLCOM and HPRCOM. Use only if these signals are set to constant VCM.
JMP17
Installed
When installed, shorts across the output capacitor on HPRCOM; remove this jumper if using AC-coupled output drive
JMP18
Open
Selects onboard EEPROM as Firmware Source.
JMP19
Open
When installed, allows the USB-MODEVM to hardware reset the device under user control
The analog inputs to the EVM can be connected through two different methods. The analog input sources
can be applied directly to J13 (top or bottom side) or through the analog headers (J1-3 and J6) around the
edge of the board. The connection details of each header/connector can be found in Appendix A.
The analog outputs to the EVM can be connected through two different methods. The analog outputs are
available from the J13 and J14 (top or bottom) or they may be accessed through J4, J5, J7, J11,and J12
at the edges of the board. The connection details can be found in Appendix A.
The digital inputs and outputs of the EVM can be monitored through J16 and J17. If external signals need
to be connected to the EVM, digital inputs should be connected via J14 and J15 on the USB-MODEVM
and the SW2 switch should be changed accordingly (see Section 2.2.1). The connector details are
available in Section A.2.
The digital control signals can be applied directly to J16 and J17 (top or bottom side). The modular
TLV320AIC3104EVM can also be connected directly to a DSP interface board, such as the
5-6KINTERFACE or HPA-MCUINTERFACE, or to the USB-MODEVM Interface board if purchased as part
of the TLV320AIC3104EVM-PDK. See the product folders on the TI Web site for these evaluation
modules or the TLV320AIC3104 for a current list of compatible interface and/or accessory boards.
The TLV320AIC3104EVM can be powered independently when being used in stand-along operation or by
the USB-MODEVM when it is plugged onto the motherboard.
6
TLV320AIC3104EVM and TLV320AIC3104EVM-PDK
SLAU218 – August 2007
Submit Documentation Feedback




Html 페이지

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60 


데이터시트




링크 URL

ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ]  

Alldatasheet는?   |   광고문의    |   운영자에게 연락하기   |   개인정보취급방침   |   즐겨찾기   |   링크교환   |   제조사별 검색
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl