전자부품 데이터시트 검색엔진 |
|
AD5700 데이터시트(PDF) 8 Page - Analog Devices |
|
AD5700 데이터시트(HTML) 8 Page - Analog Devices |
8 / 24 page AD5700/AD5700-1 Data Sheet Rev. D | Page 8 of 24 Pin No. Mnemonic Description 19 AGND Analog Circuitry Ground Reference Connection. 20 XTAL2 Connection for External 3.6864 MHz Crystal. Do not connect to this pin if using the internal RC oscillator (AD5700-1 only) or an external clock source. 21 XTAL1 Connection for External 3.6864 MHz Crystal or External Clock Source Input. Tie this pin to ground if using the internal RC oscillator (AD5700-1 only). 22 DGND Digital Circuitry Ground Reference Connection. For typical operation, it is recommended to connect this pin to AGND. 23 REF_EN Reference Enable. A high state enables the internal 1.5 V reference and buffer. A low state disables the internal reference and input buffer, and a buffered external 2.5 V reference source must be applied at REF. If REF_EN is tied low, VCC must be greater than 2.7 V. 24 FILTER_SEL Band-Pass Filter Select. A high state enables the internal filter and the HART signal should be applied to the HART_IN pin. A low state disables the internal filter and an external band-pass filter must then be connected at the ADC_IP input pin. In this case, the HART signal should be applied to the ADC_IP pin. EPAD EPAD Exposed Pad. For typical operation, it is recommended to connect this pin to AGND. |
유사한 부품 번호 - AD5700 |
|
유사한 설명 - AD5700 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |