Features

 Subminiature flat top package

– ideal for backlighting and light piping applications

 Subminiature dome package

– diffused dome for wide viewing angle

– nondiffused dome for high brightness

 TTL and LSTTL compatible 5 volt resistor lamps

 Available in six colors

 Ideal for space limited applications

 Axial leads

 Available with lead configurations for surface mount

and through hole PC board mounting

Description

Flat Top Package

The HLMP-Pxxx Series flat top lamps use an untinted, non-

diffused, truncated lens to provide a wide radiation pat-

tern that is necessary for use in backlighting applications.

The flat top lamps are also ideal for use as emitters in light

pipe applications.

Dome Packages

The HLMP-6xxx Series dome lamps for use as indicators

use a tinted, diffused lens to provide a wide viewing angle

with a high on-off contrast ratio. High brightness lamps

use an untinted, nondiffused lens to provide a high lumi-

nous intensity within a narrow radiation pattern.

Resistor Lamps

The HLMP-6xxx Series 5 volt subminiature lamps with

built in current limiting resistors are for use in applications

where space is at a premium.

Lead Configurations

All of these devices are made by encapsulating LED chips

on axial lead frames to form molded epoxy subminiature

lamp packages. A variety of package configuration op-

tions is available. These include special surface mount

lead configurations, gull wing, yoke lead or Z-bend. Right

angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm

(0.200 inch) center spacing are available for through hole

mounting. For more information refer to Standard SMT

and Through Hole Lead Bend Options for Subminiature

LED Lamps data sheet.

HLMP-Pxxx Series, HLMP-Qxxx Series

HLMP-6xxx Series, HLMP-70xx Series

Subminiature LED Lamps

Data Sheet