Dimensions in inches and (millimeters)

SMBJ SERIES

600 Watts Surface Mount

Transient Voltage Suppressor

SMB/DO-214AA

Features

For surface mounted application

Low profile package

Built-in strain relief

Glass passivated junction

Excellent clamping capability

Fast response time: Typically less than 1.0ps

from 0 volt to BV min.

μA above 10V

High temperature soldering guaranteed:

Plastic material used carries Underwriters

Laboratory Flammability Classification 94V-0

600 watts peak pulse power capability with a 10

x 1000 us waveform by 0.01% duty cycle

Mechanical Data

Case: Molded plastic

Terminals: Pure tin plated lead free,

Polarity: Indicated by cathode band except

bipolar

Weight: 0.093gram

Maximum Ratings and Electrical Characteristics

Type Number

Symbol

Value

Units

Minimum 600

Watts

Steady State Power Dissipation

Pd

3

Watts

Peak Forward Surge Current, 8.3 ms Single Half

Sine-wave Superimposed on Rated Load

(JEDEC method) (Note 2, 3) - Unidirectional Only

100

Amps

Maximum Instantaneous Forward Voltage at 50.0A for

Unidirectional Only (Note 4)

3.5 / 5.0

Volts

Typical Thermal Resistance (Note 5)

10

55

Operating and Storage Temperature Range

-65 to + 150

Notes:

2. Mounted on 5.0mm

3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute Maximum.

5. Measured on P.C.B. with 0.27 x 0.27” (7.0 x 7.0mm) Copper Pad Areas

.

Devices for Bipolar Applications

1. For Bidrectional Use C or CA Suffix for Types SMBJ5.0 through Types SMBJ170.

2. Electrical Characteristics Apply in Both Directions.

http://www.luguang.cn

mail:lge@luguang.cn